S5 Chemistry Calorimetry (Error Correction)
- 2026-11-22
S5 Chemistry Calorimetry (Error Correction)
S5 Chemistry calorimetry misconceptions
S5 Chemistry calorimetry misconceptions S5 Chemistry calorimetry misconceptions
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 25 minutes |
| Difficulty mix | Error redo 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S5 . calorimetry error correction |
02 Questions (10 items)
- Error redoWhen using q = mcDT, should c be 4.2 or 4.2 kJ?
- Error redoDoes it matter whether the temperature rise is in Celsius or kelvin?
- Error redoHow many moles of water form when 0.0500 mol of acid is exactly neutralised by 0.0500 mol of alkali?
- Error redoShould the enthalpy change of an exothermic reaction be written with a plus or minus sign?
- Error redoIf the lid of the insulated cup is left open during calorimetry, is the measured heat release too large or too small?
- Error redoNeutralising with concentrated sulphuric acid gives out more heat than with the dilute acid. Why?
- Error redoWhen 0.0200 mol of water forms, 1146 J is released. Find the enthalpy of neutralisation in kJ per mole.
- Error redoFor enthalpy of combustion, should an insulated cup or a bomb calorimeter be used?
- Error redoWhy is the enthalpy of neutralisation of a weak acid smaller than that of a strong acid?
- Error redoWhy repeat a calorimetry experiment several times and take an average?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 4.2 J g-1 K-1 | Using 4.2 J g-1 K-1 gives q in joules; divide by 1000 at the end for kilojoules. |
| 2 | No difference | Both scales have the same degree size, so the numerical temperature difference is the same. |
| 3 | 0.0500 mol | The ratio is 1:1, so the moles of water follow the limiting reagent. |
| 4 | A minus sign | Exothermic means the system loses energy, which by convention is written as a negative value. |
| 5 | Too small | Heat escapes to the air, the temperature rise is smaller and the calculated heat release is low. |
| 6 | Concentrated acid releases heat of dilution | The heat of dilution adds to the neutralisation heat; the neutralisation value itself is unchanged. |
| 7 | About 57.3 kJ/mol | 1146 / 0.0200 = 57300 J per mole = 57.3 kJ per mole. |
| 8 | A bomb calorimeter | Combustion runs in a sealed high-pressure vessel, which ensures complete burning and accurate heat measurement. |
| 9 | Some energy goes into ionising the weak acid | The weak acid is not fully ionised, so energy is spent ionising it and less heat is released overall. |
| 10 | To reduce random error | Individual readings scatter high and low, so an average lies closer to the true value. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S5 Chemistry courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



