S5 Chemistry Electrolysis Practice 2 (Advanced)
- 2026-11-18
S5 Chemistry Electrolysis Practice 2 (Advanced)
Ten items practise charge from current and time, mass and gas volume conversions, the effect of concentration on anode products, and copper refining.
Converting current, time and deposited amount Use Q = It with time in seconds, divide by 96500, then apply the half equation to get mass or volume.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S5 Chemistry: electrolysis and electrochemistry |
| Level | Advanced |
02 Questions (10 items)
- FoundationA current of 2.0 A flows for 30 minutes. What charge passes, and what mass of copper is deposited? (Cu = 63.5)
- Foundation0.500 A flows for 2.00 hours. What volume of hydrogen is released at the cathode? (molar volume 24.0 dm3/mol)
- FoundationHow long does 1.50 A take to deposit 0.0200 mol of silver?
- FoundationElectrolysis of molten aluminium oxide passes 0.30 mol of electrons. What mass of aluminium forms? (Al = 27.0)
- Intermediate0.40 mol of electrons passes through molten sodium chloride. What volume of chlorine leaves the anode?
- IntermediateIn the electrolysis of water, if 0.60 mol of hydrogen forms at the cathode, how many moles of oxygen form?
- ChallengeHow many coulombs are needed in theory to deposit 1.00 g of copper from copper(II) sulphate?
- Challenge5.00 A for 40.0 minutes deposits what mass of silver? (Ag = 108)
- Error redoHow do the anode products differ between dilute and concentrated sodium chloride solution?
- Error redoIn copper refining, which electrode holds the impure copper and which the pure copper?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 3600 C; 1.18 g. | Convert to seconds for coulombs, divide by 96500, halve, then times 63.5. |
| 2 | 0.448 dm3. | 3600 C gives 0.0373 mol of electrons; hydrogen takes two electrons per mole. |
| 3 | About 1.29 x 10^3 s. | 1930 C divided by 1.50 A gives 1287 s. |
| 4 | 2.70 g. | Al3+ needs three electrons, so 0.30 mol gives only 0.10 mol of aluminium. |
| 5 | 4.8 dm3. | 2Cl- -> Cl2 + 2e- gives 0.20 mol of chlorine from 0.40 mol of electrons. |
| 6 | 0.30 mol. | The hydrogen to oxygen mole ratio in water electrolysis is fixed at 2:1. |
| 7 | About 3.04 x 10^3 C. | 1.00 g is 0.01575 mol; double it and times 96500. |
| 8 | 13.4 g. | 12000 C gives 0.124 mol of electrons; silver is one-to-one, so 13.4 g. |
| 9 | Oxygen from the dilute solution, chlorine from the concentrated one. | When chloride is too dilute, water is oxidised to oxygen instead. |
| 10 | Impure copper at the anode, pure copper at the cathode. | The anode dissolves and copper ions plate out as pure metal at the cathode. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



