S5 Chemistry Electrolysis and Applications (Basic)
- 2026-11-23
S5 Chemistry Electrolysis and Applications (Basic)
S5 Chemistry basic electrolysis concepts
S5 Chemistry basic electrolysis concepts S5 Chemistry basic electrolysis concepts
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 30 minutes |
| Difficulty mix | Foundation 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S5 . electrolysis basics |
02 Questions (10 items)
- FoundationWhy can dilute sulphuric acid conduct electricity?
- FoundationWhat gases are obtained at the cathode and anode when dilute sulphuric acid is electrolysed with graphite electrodes?
- FoundationHow much charge passes when a current of 2.0 A flows for 10 minutes?
- FoundationIn the previous question, how many moles of electrons pass?
- FoundationWhat are the products at the cathode and anode when molten sodium chloride is electrolysed?
- FoundationWhat is the cathode reaction when copper(II) sulphate solution is electrolysed?
- FoundationWhat are the charge and the moles of electrons when 4.0 A flows for 30 minutes?
- FoundationIn the previous question, how many moles of copper can be deposited at most?
- FoundationIf 20 cm3 of gas is collected at the cathode during electrolysis of water, how much is collected at the anode?
- FoundationSomeone says an electrolyte solution conducts by moving electrons. Is this correct?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Because it contains freely moving ions such as hydrogen and sulphate ions. | Current is carried by ion migration, so higher ion concentration means better conduction. |
| 2 | Hydrogen at the cathode and oxygen at the anode, in a volume ratio of about 2:1. | Water is electrolysed; hydrogen ions are reduced at the cathode and water is oxidised to oxygen at the anode. |
| 3 | Charge Q = 2.0 x 600 = 1200 C. | Convert time to seconds first: 10 minutes = 600 s. |
| 4 | 1200 / 96500 = 0.0124 mol. | The Faraday constant of 96500 C is the charge of one mole of electrons. |
| 5 | Sodium metal at the cathode and chlorine gas at the anode. | With no water present, chloride ions are oxidised at the anode instead of water. |
| 6 | Copper ions gain two electrons to form copper: Cu2+ + 2e- -> Cu. | Reduction occurs at the cathode, where metal ions gain electrons and are deposited. |
| 7 | Charge 7200 C and 0.0746 mol of electrons. | 30 minutes is 1800 s; multiply by the current, then divide by the Faraday constant. |
| 8 | 0.0746 mol of electrons deposit 0.0373 mol of copper. | Each copper ion needs two electrons, so divide the moles of electrons by two. |
| 9 | About 10 cm3, because the volume ratio of hydrogen to oxygen is 2:1. | For the same charge, the gas volume ratio equals the mole ratio. |
| 10 | Not correct: solutions conduct by ion migration, only metal wires conduct by electrons. | There are no free electrons in the solution, only positive and negative ions. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S5 Chemistry courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



