S5 Chemistry Electrolysis and Applications (Challenge)
- 2026-11-23
S5 Chemistry Electrolysis and Applications (Challenge)
S5 Chemistry charge and current efficiency
S5 Chemistry charge and current efficiency S5 Chemistry charge and current efficiency
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 40 minutes |
| Difficulty mix | Challenge 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S5 . electrolysis challenge |
02 Questions (10 items)
- ChallengeNickel plating deposits 0.59 g of nickel (Ni2+ + 2e- -> Ni, A=59). How many moles of electrons are needed?
- ChallengeIn the previous question, how many seconds does 1.5 A need, and roughly how many minutes?
- ChallengeElectrolysis of water gives 48 cm3 of hydrogen at room conditions (molar volume 24000 cm3/mol). What charge is needed?
- ChallengeTwo cells are in series: one deposits 0.635 g of copper and the other contains silver nitrate solution. What mass of silver is deposited?
- ChallengeCopper of mass 0.178 g (density 8.9 g/cm3) is plated onto 20 cm2. What is the thickness in mm?
- ChallengeThe chlor-alkali industry electrolyses brine at 1.0 x 10^4 A for 1 hour. How many moles of chlorine are obtained in theory?
- ChallengeWhat happens to the concentration of the solution when copper(II) sulphate is electrolysed with copper electrodes for a long time?
- ChallengeTheory predicts 1.2 g of copper but only 1.08 g is obtained. What is the current efficiency?
- ChallengeAluminium is extracted from molten aluminium oxide (Al3+ + 3e- -> Al). How many coulombs are needed per mole of aluminium?
- ChallengeIn two cells in series, is the current halved in each cell?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 0.59 / 59 = 0.01 mol of nickel, needing 0.02 mol of electrons. | A nickel ion carries two positive charges, so two moles of electrons are needed per mole of nickel. |
| 2 | Charge 1930 C needs 1286.7 s, about 21.4 minutes. | t = Q / I, then divide by 60 for minutes. |
| 3 | 48 / 24000 = 0.002 mol of hydrogen, needing 0.004 mol of electrons, that is 386 C. | Each mole of hydrogen gas comes from two moles of hydrogen ions, each taking one electron. |
| 4 | Both pass 0.02 mol of electrons, giving 0.02 mol of silver, mass 2.16 g. | In series both cells pass the same charge, so convert via the number of electrons. |
| 5 | Volume 0.178 / 8.9 = 0.02 cm3; divided by 20 cm2 gives 0.001 cm, that is 0.01 mm. | Thickness = volume / area, and 1 cm = 10 mm. |
| 6 | Charge 3.6 x 10^7 C is about 373 mol of electrons; chlorine needs 2 electrons, giving 186.5 mol. | Find Q = I t, divide by 96500 for electrons, then divide by two. |
| 7 | It stays essentially unchanged, because copper dissolving at the anode replaces copper deposited at the cathode. | Copper is involved at both electrodes, so the net change in copper ions is close to zero. |
| 8 | 1.08 / 1.2 x 100 = 90.0 percent. | Current efficiency = actual yield / theoretical yield. |
| 9 | 3 x 96500 = 289500 C. | An aluminium ion carries three positive charges, so three moles of electrons are needed per mole of aluminium. |
| 10 | No. In series the current is the same everywhere, so both cells pass the same charge. | A series circuit has a single path, so the current is not split. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S5 Chemistry courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



