/en-tutor-prep-s5-chemistry-electrolysis-applications-practice-4/
/en-tutor-prep-s5-chemistry-electrolysis-applications-practice-4/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S5 Chemistry Electrolysis and Applications (Error Revisit)

S5 Chemistry Electrolysis and Applications (Error Revisit)

  • 2026-11-23

S5 Chemistry Electrolysis and Applications (Error Revisit)

S5 Chemistry common electrolysis errors

S5 Chemistry common electrolysis errors S5 Chemistry common electrolysis errors

01 Paper details (check answers afterwards)

Item Detail
Questions 10 questions
Suggested time 25 minutes
Difficulty mix Error redo 10
Chapter Chapter: S3 Science – Wave Properties and the EM Spectrum
Level S5 . electrolysis error revisit

02 Questions (10 items)

  1. Error redoWhich electrode should the object being plated be connected to?
  2. Error redoWhat carries the current in an electrolyte solution?
  3. Error redoDoes oxidation or reduction occur at the cathode?
  4. Error redoHow do the anode products differ between dilute and concentrated brine?
  5. Error redoWhat is the charge of one mole of electrons?
  6. Error redoHow many moles of electrons are needed to deposit 1 mol of copper at the cathode?
  7. Error redoWhat is the volume ratio of the gases at the cathode and anode during electrolysis of water?
  8. Error redoWhat is the relation between the charges passed by two cells in series?
  9. Error redoWhat material should the anode be in silver plating?
  10. Error redoWhat formula gives charge, and in what units?

03 Answers and one-line notes

# Answer One-line note
1 The cathode. Metal ions gain electrons and deposit at the cathode, coating the object.
2 Migrating ions, not electrons. There are no free electrons in the solution.
3 Reduction, because the species at the cathode gains electrons. Remember: reduction at the cathode, oxidation at the anode.
4 Dilute brine gives oxygen at the anode; concentrated brine gives chlorine. The higher the chloride concentration, the more readily chloride is discharged.
5 96500 C, the Faraday constant. All electrolysis calculations use this value.
6 2 mol, because Cu2+ + 2e- -> Cu. Moles of electrons equal moles of metal times the ion charge.
7 2 to 1, hydrogen to oxygen. Two moles of hydrogen for every mole of oxygen.
8 They are equal. Same current for the same time in series, so the same charge.
9 Silver, so the anode dissolves and replenishes silver ions in the electrolyte. An inert anode would let the silver ions run out.
10 Q = I x t, with current in amperes, time in seconds and charge in coulombs. Forgetting to convert time to seconds is the most common mistake.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Join our S5 Chemistry courseTutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →