S5 Chemistry Errors and Significant Figures (Basic)
- 2026-11-23
S5 Chemistry Errors and Significant Figures (Basic)
S5 Chemistry significant figures and percentage error
S5 Chemistry significant figures and percentage error S5 Chemistry significant figures and percentage error
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 30 minutes |
| Difficulty mix | Foundation 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S5 . errors basics |
02 Questions (10 items)
- FoundationHow many significant figures are in the reading 0.00450 g?
- FoundationHow many significant figures are in 12.30 cm3?
- FoundationThe true mass is 10.0 g but 9.8 g is measured. What is the absolute error?
- FoundationIn the previous question, what is the percentage error?
- FoundationA 100 cm3 measuring cylinder has a scale error of plus or minus 1 cm3. What is the percentage error for 100 cm3?
- FoundationA burette reading to 25.00 cm3 has an uncertainty of plus or minus 0.05 cm3. What is the percentage error?
- FoundationWhat is 15.6 g plus 23.45 g, written to the correct number of figures?
- FoundationWhat is 2.5 cm multiplied by 3.42 cm, written correctly?
- FoundationWhat is random error?
- FoundationAn electronic balance is not calibrated and reads 0.2 g high every time. What type of error is this?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Three, namely the 4, the 5 and the 0. | Leading zeros only fix the decimal point and are not counted, while a trailing zero is counted. |
| 2 | Four. | The trailing zero after the decimal point shows the reading is precise to 0.01 cm3, so it counts. |
| 3 | Absolute error = 9.8 – 10.0 = -0.2 g. | Absolute error is the measured value minus the true value and may be negative. |
| 4 | 0.2 / 10.0 x 100 = 2.0%. | Percentage error is the absolute error divided by the true value, times 100. |
| 5 | About 1.0%. | One divided by 100 times 100 is 1; the larger the reading, the smaller the relative error. |
| 6 | About 0.2%. | A burette can be read to 0.05 cm3, so the relative error at 25.00 cm3 is only 0.2 per cent. |
| 7 | 39.1 g, to one decimal place. | For addition and subtraction, keep the fewest decimal places, which is one here. |
| 8 | 8.6 cm2, to two significant figures. | For multiplication and division, keep the fewest significant figures, which is two here. |
| 9 | A scatter of readings about the true value in no fixed direction, reduced by repeating and averaging. | For example, the eye is at a slightly different angle each time a scale is read. |
| 10 | Systematic error, which averaging repeated readings cannot remove. | Systematic error has a fixed direction and is dealt with by calibration or correction. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S5 Chemistry courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



