S5 Chemistry Errors and Significant Figures (Intermediate)
- 2026-11-23
S5 Chemistry Errors and Significant Figures (Intermediate)
S5 Chemistry error propagation and data handling
S5 Chemistry error propagation and data handling S5 Chemistry error propagation and data handling
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 35 minutes |
| Difficulty mix | Intermediate 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S5 . errors intermediate |
02 Questions (10 items)
- IntermediateHow many moles are in 24.60 cm3 of 0.100 M sodium hydroxide?
- IntermediateThree titres are 20.4, 20.6 and 20.5 cm3. What are the mean and the mean deviation?
- IntermediateA sample of mass 0.5000 g has volume 25.00 cm3. What is its density?
- IntermediateThe percentage errors of mass and volume are each 0.2 per cent. What is the percentage error of the density?
- IntermediateWhat is 20.50 cm3 minus 3.2 cm3, written correctly?
- IntermediateWhat is 4.50 g multiplied by 2.0, written correctly?
- IntermediateRounding 0.45 to one decimal place under the round-half-to-even rule gives what?
- IntermediateHow should a measured result be written in full?
- IntermediateReadings are closely grouped but all far from the true value. What does this show?
- IntermediateWhat rules govern significant figures for addition and for multiplication?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 24.60 x 0.100 / 1000 = 0.00246 mol, to four significant figures. | Convert to dm3 first, then multiply by the concentration. |
| 2 | Mean 20.5 cm3 and mean deviation about 0.07 cm3. | The mean deviation averages the absolute differences from the mean. |
| 3 | 0.5000 / 25.00 = 0.02 g/cm3. | Density is mass divided by volume, quoted here to three significant figures. |
| 4 | About 0.4 per cent, that is an absolute error of about 8e-05 g/cm3 on 0.0200 g/cm3. | For multiplication and division, relative errors add rather than multiply. |
| 5 | 17.3 cm3, following the fewest decimal places. | 3.2 has one decimal place, so the result is given to one decimal place. |
| 6 | 9.0 g, to two significant figures. | 2.0 has only two significant figures, so 9.00 would be wrong. |
| 7 | 0.4. | An exact half goes to the nearest even digit, which avoids a systematic upward bias. |
| 8 | As 20.50 plus or minus 0.05 cm3, giving value, uncertainty and unit. | Writing only 20.5 cm3 says nothing about the instrument precision. |
| 9 | High precision but low accuracy, usually caused by systematic error. | Precision is how tightly readings cluster; accuracy is how close they are to the true value. |
| 10 | Addition follows the fewest decimal places and multiplication the fewest significant figures. | The two rules must not be mixed, or the number of figures will be wrong. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S5 Chemistry courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



