S5 Chemistry Molarity and Dilution Practice 2 (Advanced)
- 2026-11-18
S5 Chemistry Molarity and Dilution Practice 2 (Advanced)
Ten items add mass-to-solution preparation, mixing, evaporation and an acid-base neutralisation.
Preparing solutions by mass, mixing and dilution Fix the volume unit first, then handle mole ratios and the total volume after mixing.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S5 Chemistry: molarity and dilution |
| Level | Advanced |
02 Questions (10 items)
- Foundation5.85 g of sodium chloride (M = 58.5 g/mol) is made up to 250 cm3. What is the molarity?
- FoundationWhat mass of sodium carbonate (M = 106 g/mol) is needed to make 250 cm3 of a 0.20 mol/dm3 solution?
- Foundation25.0 cm3 of a 2.0 mol/dm3 solution is diluted to 200 cm3 in total. What is the new concentration?
- Foundation25.0 cm3 of 0.10 mol/dm3 sodium hydroxide exactly neutralises 20.0 cm3 of hydrochloric acid (1:1). What is the acid concentration?
- IntermediateHow much 5.0 mol/dm3 stock solution is needed to prepare 250 cm3 of 0.50 mol/dm3 solution?
- IntermediateWhat mass of CuSO4.5H2O (M = 250 g/mol) is needed to make 500 cm3 of 0.15 mol/dm3 copper sulphate solution?
- Challenge100 cm3 of 0.20 mol/dm3 is mixed with 100 cm3 of 0.40 mol/dm3 of the same solute. What is the final concentration?
- Challenge200 cm3 of 0.50 mol/dm3 solution is evaporated to 50 cm3. What is the new concentration?
- Error redoHow many moles of solute are in 20.0 cm3 of 0.020 mol/dm3 potassium manganate(VII) solution?
- Error redoError check: 50.0 cm3 of 2.0 mol/dm3 solution is added to 150 cm3 of water and 150 is used as the total volume, giving 0.67 mol/dm3. What is correct?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | n = 5.85 / 58.5 = 0.10 mol, c = 0.10 / 0.250 = 0.40 mol/dm3. | Two steps: moles first, then divide by the volume. |
| 2 | n = 0.20 x 0.250 = 0.050 mol, mass = 0.050 x 106 = 5.3 g. | Get moles from cV first, then multiply by the molar mass. |
| 3 | c2 = 2.0 x 25.0 / 200 = 0.25 mol/dm3. | Note it is made up to 200 cm3, not 200 cm3 of water added. |
| 4 | n(NaOH) = 0.10 x 0.0250 = 0.0025 mol, c(HCl) = 0.0025 / 0.0200 = 0.125 mol/dm3. | For a 1:1 mole ratio, c1V1 = c2V2 can be used directly. |
| 5 | V1 = c2V2 / c1 = 0.50 x 250 / 5.0 = 25 cm3. | Rearrange the dilution formula, then add water up to the mark. |
| 6 | n = 0.15 x 0.500 = 0.075 mol, mass = 0.075 x 250 = 18.75 g. | Use 250 for the hydrated salt, not 160 for the anhydrous one. |
| 7 | n = 0.020 + 0.040 = 0.060 mol, V = 0.200 dm3, c = 0.30 mol/dm3. | Add the moles, add the volumes, then divide. |
| 8 | c2 = 0.50 x 200 / 50 = 2.0 mol/dm3. | Moles stay the same on evaporation, so a smaller volume means a higher concentration. |
| 9 | n = 0.020 x 0.0200 = 4.0 x 10-4 mol. | 20.0 cm3 equals 0.0200 dm3. |
| 10 | The total volume is 50.0 + 150 = 200 cm3, so c2 = 2.0 x 50.0 / 200 = 0.50 mol/dm3. | Use the total volume after mixing, not the volume of water added. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



