/en-tutor-prep-s5-chemistry-molarity-dilution-practice-3/
/en-tutor-prep-s5-chemistry-molarity-dilution-practice-3/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S5 Chemistry Molarity and Dilution Practice 3 (Challenge)

S5 Chemistry Molarity and Dilution Practice 3 (Challenge)

  • 2026-11-18

S5 Chemistry Molarity and Dilution Practice 3 (Challenge)

Ten items include a 1:2 titration volume, the molarity of concentrated sulphuric acid, an unknown molar mass and ppm.

Mole ratios, concentrated acids and back-calculation Write the mole ratio before substituting, and use density times mass fraction for a concentrated acid.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: S5 Chemistry: molarity and dilution
Level Challenge

02 Questions (10 items)

  1. Foundation25.0 cm3 of 0.10 mol/dm3 sodium carbonate reacts with hydrochloric acid in a 1:2 ratio. What volume of 0.10 mol/dm3 acid is needed?
  2. FoundationWhat is the molarity of 98% concentrated sulphuric acid (M = 98 g/mol, density 1.84 g/cm3)?
  3. FoundationHow much 2.0 mol/dm3 stock solution is needed to make 500 cm3 of 0.50 mol/dm3 solution?
  4. Foundation0.0050 mol of solute is made up to 250 cm3. What is the molarity?
  5. Intermediate20 g of sodium hydroxide (M = 40 g/mol) is made up to 500 cm3. What is the molarity?
  6. IntermediateA 1.0 mol/dm3 solution is diluted tenfold twice. What is the final concentration?
  7. Challenge0.20 g of a monoprotic acid needs 25.0 cm3 of 0.080 mol/dm3 sodium hydroxide for neutralisation. What is its molar mass?
  8. ChallengeHow many milligrams of solute are in 1.0 dm3 of a 5 ppm solution?
  9. Error redo12.5 g of CuSO4.5H2O (M = 250 g/mol) is made up to 250 cm3. What is the molarity?
  10. Error redoError check: 25.0 cm3 of 2.0 mol/dm3 is diluted to 250 cm3, but 275 cm3 is used as the final volume, giving 0.18 mol/dm3. What is correct?

03 Answers and one-line notes

# Answer One-line note
1 n(Na2CO3) = 0.0025 mol, n(HCl) = 0.0050 mol, V = 0.0050 / 0.10 = 0.050 dm3 = 50 cm3. Multiply by the 2:1 mole ratio first, then divide by the acid concentration.
2 c = 1000 x 1.84 x 0.98 / 98 = 18.4 mol/dm3. One dm3 weighs 1840 g; multiply by the mass fraction to get pure acid.
3 V1 = 0.50 x 500 / 2.0 = 125 cm3. Use c1V1 = c2V2, where 500 cm3 is the final volume.
4 c = 0.0050 / 0.250 = 0.020 mol/dm3. Two significant figures, so write 0.020 not 0.02.
5 n = 20 / 40 = 0.50 mol, c = 0.50 / 0.500 = 1.0 mol/dm3. Get the moles, then divide by 0.500 dm3.
6 1.0 / 10 / 10 = 0.010 mol/dm3. Each tenfold dilution divides by ten, so twice means one hundredfold.
7 n(NaOH) = 0.080 x 0.0250 = 0.0020 mol, M = 0.20 / 0.0020 = 100 g/mol. For a 1:1 ratio the moles of base equal the moles of acid.
8 5 ppm means 5 mg per dm3, since 1 ppm = 1 mg/dm3. ppm is parts per million, which for water is mg per dm3.
9 n = 12.5 / 250 = 0.050 mol, c = 0.050 / 0.250 = 0.20 mol/dm3. Use 250 throughout; do not switch to 160 for the anhydrous salt.
10 The final volume is 250 cm3, so c2 = 2.0 x 25.0 / 250 = 0.20 mol/dm3. Diluted to means the final volume in the flask; do not add the original volume.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →