S5 Chemistry Qualitative Analysis Practice 3 (Challenge)
- 2026-11-18
S5 Chemistry Qualitative Analysis Practice 3 (Challenge)
Ten items cover simultaneous equations for mixtures, back titration, limiting reagents, percentage error and flame masking, with the test order left to the student.
Mixtures, back titration and limiting reagents Two equations for mixtures; total minus excess for back titration; find the limiting reagent before using the total volume.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S5 Chemistry: qualitative analysis and ion tests |
| Level | Challenge |
02 Questions (10 items)
- FoundationA mixture of 0.0100 mol of sodium chloride and sodium iodide in water gives 1.801 g of precipitate with excess silver nitrate. Find the moles of chloride and iodide.
- Foundation3.00 g of a sodium sulphate and sodium carbonate mixture gives 2.33 g of precipitate with excess barium chloride after acidification. Find the mass percentage of sodium sulphate. (Na2SO4 = 142)
- FoundationA solution gives a blue-green flame, a pale blue precipitate with sodium hydroxide, and a deep blue solution when excess ammonia is added. Which ion is it, and how many moles of precipitate come from 0.0050 mol of it?
- Foundation25.0 cm3 of 0.100 mol/dm3 silver nitrate is added to a chloride solution; the excess silver needs 15.0 cm3 of 0.0500 mol/dm3 potassium thiocyanate. Find the moles of chloride and the mass of silver chloride.
- IntermediateAn unknown solution gives a white precipitate with sodium hydroxide that dissolves in excess, a white precipitate with ammonia that also dissolves in excess, and no clear flame colour. Which ion is present?
- Intermediate0.500 g of ammonium chloride is warmed with excess sodium hydroxide. What volume of ammonia, in dm3, should be collected? (NH4Cl = 53.5, molar volume 24.0 dm3/mol)
- Challenge50.0 cm3 of 0.200 mol/dm3 copper sulphate is mixed with 50.0 cm3 of 0.300 mol/dm3 sodium hydroxide. Find the precipitate mass and the remaining copper ion concentration.
- ChallengeTheory predicts 0.245 g of precipitate from 0.0025 mol of copper ions but only 0.231 g is obtained. Find the percentage error.
- Error redoA sample contains both sodium and potassium ions but the flame test only shows a strong golden yellow. How can potassium be confirmed, and why is it needed?
- Error redoA student argues that a white precipitate dissolving in excess sodium hydroxide proves zinc. Where is the flaw?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Let chloride be x and iodide y: x + y = 0.0100 and 143.5x + 235y = 1.801, giving y = 0.0040 and x = 0.0060. | Two equations: total moles and total precipitate mass, with AgI at molar mass 235. |
| 2 | 0.0100 mol of BaSO4 means 1.42 g of sodium sulphate, that is 1.42 / 3.00 x 100 = 47.3%. | Acid destroys the carbonate, so the precipitate is pure barium sulphate and maps directly onto the sulphate. |
| 3 | Copper(II); 0.0050 mol gives 0.0050 mol of Cu(OH)2. | A blue-green flame plus the deep blue ammonia complex is the double evidence for copper(II). |
| 4 | Total silver 0.00250 mol minus 0.000750 mol back titrated leaves 0.00175 mol of chloride, so AgCl is 0.00175 x 143.5 = 0.251 g. | Back titration: total minus excess is what reacted with the chloride. |
| 5 | Zinc ions (Zn2+): amphoteric and forming a soluble ammonia complex, with no strong flame colour. | Both excess solubility tests passing together points to zinc almost uniquely. |
| 6 | 0.009346 mol of ammonium chloride gives 0.009346 mol of ammonia, that is 0.2243 dm3. | Ammonium salt and alkali release ammonia one for one, then use the molar volume. |
| 7 | 0.0100 mol of copper and 0.0150 mol of hydroxide make hydroxide limiting: 0.0075 mol of precipitate, that is 0.735 g; 0.0025 mol of copper remains in 100 cm3, that is 0.0250 mol/dm3. | Spot the limiting reagent (hydroxide to copper is 2:1), then divide by the total volume for the leftover concentration. |
| 8 | Error (0.245 – 0.231) / 0.245 x 100 = 5.71%. | The denominator is the theoretical value, not the experimental one. |
| 9 | View the flame through cobalt glass: the yellow is filtered out and the lilac shows; the strong sodium yellow otherwise masks the potassium lilac. | This is a sensitivity limit of the flame test, not evidence that potassium is absent. |
| 10 | Aluminium also gives a white precipitate that dissolves in excess sodium hydroxide; excess ammonia is needed to separate them (aluminium does not dissolve). | A single test narrows down but never confirms; qualitative analysis relies on a combination and order of tests. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



