/en-tutor-prep-s5-chemistry-qualitative-analysis-tests-practice-4/
/en-tutor-prep-s5-chemistry-qualitative-analysis-tests-practice-4/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S5 Chemistry Qualitative Analysis Practice 4 (Retry)

S5 Chemistry Qualitative Analysis Practice 4 (Retry)

  • 2026-11-18

S5 Chemistry Qualitative Analysis Practice 4 (Retry)

Ten retry items on reversed precipitate colours, the wrong reagent, 1:1 instead of 1:2 ratios, forgotten acidification and subtraction in dilution.

Re-drilling the most common slips Name the reagent and the target first, write the mole ratio next, and only then substitute numbers.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: S5 Chemistry: qualitative analysis and ion tests
Level Retry

02 Questions (10 items)

  1. FoundationA student writes that iron(II) with sodium hydroxide gives a reddish brown precipitate. What is the correct colour, and which ion gives reddish brown?
  2. FoundationA student tests for sulphate with sodium hydroxide, sees no precipitate and concludes there is no sulphate. What is wrong?
  3. Foundation0.0100 mol of chloride and 0.0100 mol of iodide each react with excess silver nitrate. Find the two precipitate masses and say which dissolves in ammonia.
  4. FoundationForgetting to acidify: what mass of false positive precipitate would 0.0100 mol of carbonate give? (BaCO3 = 197)
  5. IntermediateA student treats copper and hydroxide as combining one to one. What is the correct ratio, and how many moles of hydroxide does 0.0020 mol of copper need?
  6. IntermediateFor 0.0020 mol of copper ions a student counts only the copper and gets 0.128 g. Find the correct precipitate mass and the mistake.
  7. ChallengeA student expects a precipitate from ammonium ions and sodium hydroxide. What is actually observed, and what volume of ammonia comes from 0.0500 mol of ammonium?
  8. ChallengeA student mistakes the blue-green copper flame for the lilac potassium flame. How are they told apart?
  9. Error redoA student treats dissolving in excess sodium hydroxide and dissolving in ammonia as the same thing. What is the difference?
  10. Error redoA student dilutes 10.0 cm3 of 0.200 mol/dm3 solution to 100 cm3 and writes 0.180 mol/dm3. Find the correct concentration and the mistake.

03 Answers and one-line notes

# Answer One-line note
1 Iron(II) gives dirty green Fe(OH)2; reddish brown belongs to iron(III) as Fe(OH)3. One is dark green and the other reddish brown, and the wrong word loses the whole mark.
2 The reagent for sulphate is acidified barium chloride, not sodium hydroxide, which tests cations. Be clear which species a reagent targets: anion and cation tests are two different sets.
3 AgCl is 1.435 g (soluble in ammonia) and AgI is 2.35 g (insoluble). The solubility difference of the silver salts is exactly how the halides are told apart.
4 1.97 g of barium carbonate, also white, which is easily mistaken for barium sulphate. A false positive is more dangerous than a miss because it produces a wrong conclusion outright.
5 One to two: 0.0020 mol of copper needs 0.0040 mol of hydroxide. Read the formula Cu(OH)2: there are two hydroxides per copper.
6 The precipitate is Cu(OH)2, so 0.0020 x 98 = 0.196 g, not 64 per mole of copper alone. Use the molar mass of the whole formula for a precipitate.
7 No precipitate: pungent ammonia is released and damp red litmus turns blue; 0.0500 mol of ammonia is 0.0500 x 24.0 = 1.2 dm3. Ammonium is the one cation identified by warming with alkali rather than by a precipitate.
8 Copper is blue-green, potassium lilac; potassium needs cobalt glass, and copper gives a deep blue solution in ammonia. When flame colours are close, cross-check with a second test such as the ammonia complex.
9 Excess sodium hydroxide dissolves amphoteric hydroxides (zinc, aluminium); ammonia dissolves ions forming ammine complexes (copper, zinc, silver). The two lists differ, and mixing them up turns aluminium into zinc.
10 Correct: 0.200 x 10.0 / 100 = 0.0200 mol/dm3; dilution keeps the moles and multiplies volume by ten, so concentration is divided by ten. Dilution is not subtraction; use the volume ratio.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →