S5 Chemistry Preparation of Salts (Intermediate)
- 2026-11-22
S5 Chemistry Preparation of Salts (Intermediate)
S5 Chemistry salt routes and yield
S5 Chemistry salt routes and yield S5 Chemistry salt routes and yield
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 30 minutes |
| Difficulty mix | Intermediate 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S5 . salt routes and yield |
02 Questions (10 items)
- IntermediateWhy is copper(II) oxide used instead of copper metal with dilute sulphuric acid?
- IntermediateWhy is titration used rather than an excess method when making sodium chloride from sodium hydroxide and dilute hydrochloric acid?
- IntermediateHow much sodium carbonate, Mr 106, is in 250 cm3 of 0.200 M solution?
- Intermediate0.0150 mol of barium chloride reacts with excess sodium sulphate solution. What mass of barium sulphate, Mr 233.3, is formed?
- IntermediateA preparation has a theoretical yield of 12.0 g but gives only 9.60 g. What is the percentage yield?
- IntermediateWhat volume of 0.500 M hydrochloric acid dissolves 0.0500 mol of calcium carbonate completely?
- IntermediateWhy is one solution used in slight excess when making barium sulphate by precipitation?
- IntermediateA white precipitate appears on adding silver nitrate solution. What is the purpose of adding dilute nitric acid next?
- IntermediateWhat is the purpose of adding small seed crystals when crystallising copper(II) sulphate?
- IntermediateAmmonium chloride decomposes on heating. How should its crystals be obtained from solution?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Copper sits below hydrogen in the reactivity series and does not react with dilute sulphuric acid. | Copper(II) oxide is a basic oxide that reacts directly with the acid to form a salt and water. |
| 2 | Both reactants are soluble, so excess cannot be filtered off and an indicator is needed to find the equivalence point. | After the equivalence point the solution is evaporated to crystallise the salt, and one or two drops of indicator do not affect purity. |
| 3 | 5.30 g. | 0.250 dm3 times 0.200 M gives 0.0500 mol, and 0.0500 times 106 gives 5.30 g. |
| 4 | 3.50 g. | The ratio is one to one, and 0.0150 times 233.3 gives 3.4995 g. |
| 5 | 80.0 per cent. | Percentage yield is the actual over the theoretical mass, that is 9.60 over 12.0. |
| 6 | 200 cm3. | Each mole of carbonate needs two moles of acid, and 0.100 mol over 0.500 M gives 0.200 dm3. |
| 7 | To make sure the other ion is precipitated completely and the yield is higher. | The excess soluble ions are washed away with distilled water after filtration. |
| 8 | To rule out false precipitates such as silver carbonate. | Silver chloride does not dissolve in dilute nitric acid, while silver carbonate dissolves with bubbles of gas. |
| 9 | They provide centres for growth, so larger crystals form more readily. | Seeds let the solute grow on an existing surface instead of forming a fine powder. |
| 10 | By slow evaporation at room temperature or by vacuum drying. | Heating an ammonium salt releases ammonia and hydrogen chloride, so evaporating to dryness loses the product. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S5 Chemistry courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



