S5 Chemistry Preparation of Salts (Challenge)
- 2026-11-22
S5 Chemistry Preparation of Salts (Challenge)
S5 Chemistry purity and hydration sums
S5 Chemistry purity and hydration sums S5 Chemistry purity and hydration sums
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 35 minutes |
| Difficulty mix | Challenge 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S5 . purity and hydration sums |
02 Questions (10 items)
- Challenge25.0 cm3 of 0.100 M sodium carbonate needs 24.60 cm3 of hydrochloric acid. What is the acid concentration?
- ChallengeIn the same titration, what volume of 0.100 M acid would be needed?
- Challenge5.00 g of impure sodium sulphate gives 4.60 g of barium sulphate, Mr 233.3, with excess barium chloride. What is the percentage purity?
- ChallengeHeating 2.50 g of a hydrate leaves 1.60 g of anhydrous salt of Mr 160. How many moles of water of crystallisation per mole of salt?
- ChallengeA crystallisation should give 25.0 g but yields 18.5 g after filtration. What is the percentage yield?
- ChallengePhenolphthalein is used while titrating sodium hydroxide with dilute sulphuric acid to make sodium sulphate. What colour change marks the end point?
- ChallengeDuring evaporation the blue copper(II) sulphate solution turns into a white powder. What does this show?
- ChallengeWhy can precipitation not be used to prepare potassium nitrate?
- ChallengeThe final washings from a barium sulphate precipitate give no precipitate with silver nitrate. What does this show?
- Challenge0.0100 mol of silver nitrate reacts with excess sodium chloride solution. What mass of silver chloride, Mr 143.4, forms?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 0.203 M. | The carbonate is 0.00250 mol and needs 0.00500 mol of acid, which over 0.02460 dm3 gives 0.203 M. |
| 2 | 50.0 cm3. | 0.00500 mol divided by 0.100 M gives 0.0500 dm3. |
| 3 | 56.0 per cent. | 4.60 over 233.3 gives 0.0197 mol, times 142 gives 2.80 g, and that over 5.00 is the purity. |
| 4 | Five moles. | The water lost is 0.900 g or 0.0500 mol while the anhydrous salt is 0.0100 mol, a ratio of five to one. |
| 5 | 74.0 per cent. | 18.5 over 25.0 times 100 gives 74.0 per cent, the rest staying dissolved in the mother liquor. |
| 6 | From pink to colourless. | The end point of a strong acid with a strong base is near neutral, so phenolphthalein suits and its change is easy to see. |
| 7 | Overheating has driven off the water of crystallisation. | Anhydrous copper(II) sulphate is white, so heating should stop as soon as crystals appear on the surface. |
| 8 | Nitrates and potassium salts are all soluble, so mixing two solutions gives no precipitate. | Potassium nitrate is made by neutralisation, for example nitric acid with potassium hydroxide, then crystallised. |
| 9 | The soluble chloride has been washed out. | A white precipitate would mean chloride ions remain and more distilled water is needed. |
| 10 | 1.43 g. | The ratio is one to one, and 0.0100 times 143.4 gives 1.434 g. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S5 Chemistry courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



