S5 Chemistry Preparation of Salts (Error Correction)
- 2026-11-22
S5 Chemistry Preparation of Salts (Error Correction)
S5 Chemistry salt misconceptions
S5 Chemistry salt misconceptions S5 Chemistry salt misconceptions
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 questions |
| Suggested time | 25 minutes |
| Difficulty mix | Error redo 10 |
| Chapter | Chapter: S3 Science – Wave Properties and the EM Spectrum |
| Level | S5 . salts error correction |
02 Questions (10 items)
- Error redoA student says precipitation can prepare any salt. What is wrong?
- Error redoIs it true that every chloride dissolves in water?
- Error redoIs it true that every sulphate dissolves in water?
- Error redoA student evaporates a salt solution to dryness to collect crystals. What is wrong with this?
- Error redoIs it true that copper reacts with dilute sulphuric acid to give hydrogen?
- Error redoIs it true that calcium carbonate dissolves, so it can be made by precipitation?
- Error redoIs it true that adding more indicator makes the end point more accurate?
- Error redoA student says the water driven off from a hydrate is water produced by a reaction. Is that right?
- Error redoCan a percentage yield be greater than 100 per cent?
- Error redoIs it true that the more precipitating agent the better?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Precipitation gives only insoluble salts, while soluble salts come from an acid with a metal, a carbonate or an alkali, then crystallisation. | Mixing two soluble salts gives a solution only when no precipitate forms, so it cannot make a soluble salt. |
| 2 | No. Silver chloride and lead(II) chloride do not dissolve. | Silver chloride is insoluble, which is exactly why silver nitrate tests for chloride ions. |
| 3 | No. Barium sulphate and lead(II) sulphate do not dissolve and calcium sulphate is only slightly soluble. | The main exceptions in the solubility table must be memorised, or precipitation predictions go wrong. |
| 4 | Soluble impurities stay behind and some salts decompose or lose their water of crystallisation. | The correct route is to concentrate until crystals appear, then cool, crystallise and filter. |
| 5 | No. Copper lies below hydrogen in the reactivity series and does not react with dilute acids. | Copper(II) sulphate is made from the oxide, hydroxide or carbonate with dilute sulphuric acid. |
| 6 | No. Calcium carbonate is insoluble, which is exactly why precipitation can prepare it. | Mixing calcium chloride solution with sodium carbonate solution gives a calcium carbonate precipitate. |
| 7 | No. The indicator is itself an impurity, so one or two drops suffice. | Too much indicator blurs the end point colour and adds impurity to the product. |
| 8 | No. The water lost is the water of crystallisation held in the crystal lattice. | Adding water to the anhydrous salt restores the hydrate, and the colour returns from white to blue. |
| 9 | Not in theory. A value above 100 per cent means the product is damp or impure. | Dry the product thoroughly and weigh it before calculating the yield. |
| 10 | No. A slight excess ensures complete precipitation, while a large excess makes washing harder. | Excess reagent adsorbs on the precipitate surface and lowers the purity. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Join our S5 Chemistry courseTutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



