S5 Geography Industrial Location Practice 1 (Basics)
- 2026-11-18
S5 Geography Industrial Location Practice 1 (Basics)
Ten items start from the material index and simple freight sums, drilling tonnage x distance x rate.
Material index and basic freight arithmetic Work out the material index first, then multiply tonnage by distance and rate; the last two items tackle common errors.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S5 Geography: industrial location |
| Level | Basics |
02 Questions (10 items)
- FoundationA factory uses 6 tonnes of raw material to make 2 tonnes of finished product. What is the material index?
- FoundationRaw material is 3 tonnes and the finished product is also 3 tonnes. What is the material index?
- Foundation2 tonnes of raw material are turned into 4 tonnes of finished product. What is the index and where should the plant be sited?
- FoundationTransport costs $2 per tonne-kilometre. What is the total cost of moving 4 tonnes over 100 km?
- IntermediateSource A supplies 2 tonnes 50 km away; source B supplies 3 tonnes 100 km away, at $2 per tonne-kilometre. What is the combined transport cost?
- IntermediateRaw material costs $40 and total cost is $200. What percentage of total cost is raw material?
- ChallengeSite A has fixed cost $1,000 plus $4 per km; site B has $1,600 plus $2 per km. At what distance do the two costs break even?
- ChallengeLabour costs $600 out of a total cost of $3,000. What share is labour?
- Error redoA student says: an index of 0.4 means the input is heavy, so the plant belongs at the raw material. Is that right?
- Error redoAnother student gets an index of 4 for 2 tonnes of input and 8 tonnes of product. What is the correct value?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Material index = 6 / 2 = 3.0. | An index above 1 means a weight-losing industry, so it tends to locate near the raw material. |
| 2 | 3 / 3 = 1.0. | An index of 1 means neither weight loss nor gain, so transport is a weak locational pull. |
| 3 | 2 / 4 = 0.5, a weight-gaining industry, so site it near the market. | An index below 1 means the product is heavier, so shipping the product costs more than shipping the input. |
| 4 | 4 x 100 x $2 = $800. | Three things are needed: tonnage, distance and the rate per tonne-kilometre. |
| 5 | 2 x 50 x 2 + 3 x 100 x 2 = 200 + 600 = $800. | With several sources, cost each leg separately and add the tonne-kilometres. |
| 6 | $40 / $200 x 100% = 20%. | Only a high share justifies moving the plant closer to the material. |
| 7 | 1,000 + 4d = 1,600 + 2d gives d = 300 km. | Write both cost equations and equate them rather than guessing. |
| 8 | $600 / $3,000 x 100% = 20%. | A low labour share means relocation may not save much. |
| 9 | No. 0.4 is below 1, so the product is heavier; it is a weight-gaining industry and should be near the market. | The index divides input weight by product weight, so below 1 means a heavier product. |
| 10 | It is 2 / 8 = 0.25; the division was inverted. | Always write input divided by product and the inversion cannot happen. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



