S5 ICT IoT and Embedded Systems Practice 1 (Basic)
- 2026-11-18
S5 ICT IoT and Embedded Systems Practice 1 (Basic)
Ten items start from the embedded-versus-general-purpose split and sensor or actuator roles, then cover ADC levels, sampling counts, upload volume and battery hours.
Embedded system parts and basic conversions Know which layer does what, unify units first, then decide whether to multiply or divide.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S5 ICT: IoT and embedded systems |
| Level | Basic |
02 Questions (10 items)
- FoundationWhat is the biggest difference between an embedded system and an ordinary personal computer?
- FoundationIn an IoT system, what roles do a temperature sensor and a cooling fan play?
- FoundationHow many levels does a 10-bit analogue-to-digital converter (ADC) split a voltage range into?
- FoundationA sensor reads once every 5 minutes. How many readings in a 24-hour day?
- IntermediateA 12-bit ADC uses 5 V as its reference. How many mV does each step represent?
- IntermediateA device uploads a 12-byte reading every 10 seconds for 30 days. What is the total in MB?
- ChallengeA device runs on a 2,000 mAh battery and draws 20 mA on average. How many hours will it last?
- ChallengeA device transmits for 0.1 s out of every second at 30 mA and idles at 2 mA for the rest. With a 2,000 mAh battery, how many hours?
- Error redoError check: an 8-bit ADC was said to resolve 255 levels. What is the correct count?
- Error redoError check: sampling every 2 seconds for one hour was answered as 3,600 samples. What is correct?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | An embedded system is built for one specific job, with its program and resources fixed inside the device. | A personal computer can install anything; an embedded system ships to do one thing. |
| 2 | The sensor is an input device at the sensing layer; the fan is an actuator that produces a physical action. | One reads the environment, the other changes it. |
| 3 | 1,024 levels. | The count is 2 to the power of the bit depth, so every extra bit doubles it. |
| 4 | 288 readings. | Turn 24 hours into 1,440 minutes first, then divide by 5. |
| 5 | 1.22 mV. | Convert 5 V to 5,000 mV first, then divide by 4,096 steps. |
| 6 | 2.97 MB (3,110,400 bytes). | That is 8,640 readings a day, 259,200 in total, at 12 bytes each. |
| 7 | 100 hours. | Battery capacity divided by average current gives the hours. |
| 8 | Average current 4.8 mA, about 416.7 hours. | Weight by time share: 0.1 times 30 plus 0.9 times 2. |
| 9 | 256 levels. | The top code is 255, but codes start at 0, so the total is still 256. |
| 10 | 1,800 samples. | One hour is 3,600 seconds, and one sample every 2 seconds halves that. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



