/en-tutor-prep-s5-ict-iot-embedded-systems-practice-4/
/en-tutor-prep-s5-ict-iot-embedded-systems-practice-4/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S5 ICT IoT and Embedded Systems Practice 4 (Retry)

S5 ICT IoT and Embedded Systems Practice 4 (Retry)

  • 2026-11-18

S5 ICT IoT and Embedded Systems Practice 4 (Retry)

Ten items retry the most common slips: ADC levels, sampling counts, resolution, battery hours, latency, unit conversion and protocol roles, back at basic difficulty.

Rebuilding the common error set Each item asks the same question: which step did I skip last time?

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: S5 ICT: IoT and embedded systems
Level Retry

02 Questions (10 items)

  1. FoundationWhere does an embedded system normally keep its program, and when does it run?
  2. FoundationRetry: how many resolvable levels does a 10-bit ADC have?
  3. FoundationRetry: reading every 5 minutes gives how many readings a day?
  4. FoundationRetry: a 12-bit ADC with a 5 V reference has what step size in mV?
  5. IntermediateRetry: a 2,000 mAh battery at 20 mA average lasts how many hours?
  6. IntermediateRetry: 180 ms in the cloud versus 15 ms at the edge means what percentage drop in latency?
  7. ChallengeRetry: 1 MB equals how many Mb?
  8. ChallengeRetry: in MQTT, what sits between publishers and subscribers?
  9. Error redoRetry: 0.1 s per second at 30 mA and idle at 2 mA gives what average current, and how many hours on 2,000 mAh?
  10. Error redoRetry: the 30-day total is 259,200 readings but was written as 25,920. By what factor is it short?

03 Answers and one-line notes

# Answer One-line note
1 In flash memory inside the device as firmware, running automatically on power-up. No disk and no user install step, which is what makes it embedded.
2 1,024 levels. 2 to the 10th, not 1,000.
3 288 readings. 1,440 divided by 5, not 24 divided by 5.
4 1.22 mV. 5,000 divided by 4,096, after unifying the unit.
5 100 hours. mAh divided by mA gives hours.
6 About 91.7 percent. 165 over 180; do not divide 15 by 180.
7 8 Mb. Bytes and bits are a factor of 8 apart.
8 The broker. Both sides know only the topic name, never each other address.
9 4.8 mA, so 416.7 hours on 2,000 mAh. Time-weighted average, not the plain mean of 16 mA.
10 Ten times short. 30 days times 8,640 readings; write the daily count and the days separately.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →