S5 Physics Electromagnetic Induction Practice 1 (Basic)
- 2026-11-18
S5 Physics Electromagnetic Induction Practice 1 (Basic)
Ten items build the basics: magnetic flux, Faraday law, Lenz law and the a.c. generator.
Ask first whether the flux changes Before any e.m.f. calculation, ask how much the flux changes in the given time.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S5 Physics: electromagnetic induction |
| Level | Basic |
02 Questions (10 items)
- FoundationA coil of area 0.20 m² is placed perpendicular to a uniform magnetic field of flux density 0.50 T. What is the magnetic flux through the coil?
- FoundationWhat is the SI unit of magnetic flux?
- FoundationThe flux through a single-turn coil rises from 0.10 Wb to 0.30 Wb in 0.50 s. What is the induced e.m.f.?
- FoundationFlux through a coil of area 0.040 m² is 0.080 Wb. What is the flux density?
- IntermediateIn a 50-turn coil the flux per turn increases by 0.020 Wb in 0.10 s. Find the average induced e.m.f.
- IntermediateA 0.50 m rod cuts a 0.40 T field at 3.0 m/s, perpendicular to the field. Find the e.m.f. across it.
- ChallengeA magnet is pushed north pole first into a coil. Which pole appears at the coil face nearest the magnet?
- ChallengeAt which position of the rotating coil of an a.c. generator is the flux through it greatest?
- Error redoThe flux through a closed coil is increasing. What does the induced current do?
- Error redoSome say the induced e.m.f. must be zero whenever the flux is zero. Is that right?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 0.10 Wb | Flux = B × A = 0.50 × 0.20 = 0.10 Wb. |
| 2 | Weber (Wb) | One weber equals one tesla metre squared, flux density times area. |
| 3 | 0.40 V | e.m.f. = change in flux over time = (0.30 – 0.10) / 0.50 = 0.40 V. |
| 4 | 2.0 T | B = flux / area = 0.080 / 0.040 = 2.0 T. |
| 5 | 10 V | e.m.f. = N × change in flux / time = 50 × 0.020 / 0.10 = 10 V. |
| 6 | 0.60 V | e.m.f. = B × length × speed = 0.40 × 0.50 × 3.0 = 0.60 V. |
| 7 | A north pole | Lenz law: the induced current repels the approaching north pole, so a north pole forms at that face. |
| 8 | When the coil plane is perpendicular to the field | Flux is then B × A, its maximum, though its rate of change is zero so the e.m.f. is least. |
| 9 | It produces an opposing field that resists the increase | Lenz law: the induced effect always opposes the change that caused it. |
| 10 | No | e.m.f. depends on the rate of change of flux, so it can be greatest when the flux passes through zero. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



