S6 Geography changing industrial location paper 1: location factors and transport cost
- 2026-11-18
S6 Geography changing industrial location paper 1: location factors and transport cost
Start with transport, labour and land, the basic arithmetic behind industrial site choice.
Ten basic location calculations This paper covers the three basics: raw material and product freight, unit labour cost and factory rent. Four items are direct calculations, two compare raw-material oriented with market oriented siting, two clarify labour intensity and agglomeration, and two repair common misconceptions.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S6 Geography: changing industrial location |
| Level | Basic |
02 Questions (10 items)
- FoundationA factory turns 3 tonnes of raw material into 1 tonne of product. Freight is $80 per tonne for material and $40 per tonne for product. What is the total freight bill?
- FoundationEach unit takes 0.5 labour hours at $60 per hour, falling to 0.2 hours after automation. How much labour cost is saved per unit?
- FoundationA factory floor of 2 000 square metres rents at $15 per square metre per month. What is the monthly rent?
- FoundationThe plant ships 40 containers a month at $1 200 each. What is the monthly container freight total?
- IntermediateUsing the first item: a plant at the material source ships only product, a plant at the market ships only material. How much do the two freight bills differ?
- IntermediateWhich site should a steel mill and a soft drinks plant each seek?
- ChallengeHow should a labour intensive industry be defined?
- ChallengeWhat is the main benefit of firms clustering together, that is, agglomeration economies?
- Error redoA student claims any high wage region must be labour intensive. How should that be corrected?
- Error redoA student says high raw material freight always means moving the plant to the source. What does that miss?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | $280 | Three tonnes at $80 gives $240, plus one tonne at $40, so the total is $280. |
| 2 | $18, a saving of 60 percent | Subtract 0.2 from 0.5 and multiply by 60 for $18, which is 60 percent of the original $30. |
| 3 | $30 000 | Multiply 2 000 by 15 for $30 000 a month, then by 12 for the annual figure. |
| 4 | $48 000 | Multiply 40 by 1 200 for $48 000, which is finished goods freight and sits at the market end of the chain. |
| 5 | $200 apart, with $240 at the market against $40 at the source | Hauling three tonnes costs $240 while hauling one tonne of product costs $40, so the $200 gap pulls material oriented plants to the source. |
| 6 | The steel mill the raw materials of coal and iron ore, the drinks plant the market | Steel making loses much weight so hauling ore is costly, while drinks are heavy, fragile and perishable, so the finished goods travel badly. |
| 7 | By a high share of wages in total production cost, not by a high wage level | It is a cost structure test: garments and assembly are labour intensive, while highly paid but automated sectors are capital intensive. |
| 8 | Shared infrastructure and specialist suppliers plus a pool of skilled labour lower average cost | Clustering puts parts, repairs, logistics and skilled workers nearby, cutting lead times and spreading infrastructure cost. |
| 9 | No: labour intensity depends on the wage share of cost, and high wage regions are usually capital or skill intensive | The test is the wage share of production cost; in high wage regions automation usually pushes that share down. |
| 10 | The weight loss ratio and product freight: if the product is heavier or harder to move, the market site wins | Siting compares the total bill of hauling material against hauling product, so only a high weight loss ratio pulls a plant to the source. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



