S6 ICT: data representation and number systems (basics)
- 2026-11-20
S6 ICT: data representation and number systems (basics)
Basics first: bits and bytes, then binary and hex conversion until it becomes automatic.
Basics: bits, bytes and base conversion Every data question in ICT starts with bits. One byte is 8 bits, so three bytes are 24 bits. Binary has only 0 and 1 with place values 1, 2, 4, 8 from the right, so 1011 is 11. Four bits make one hex digit, a nibble holds 16 values and hex F is 15. An unsigned 8-bit integer tops out at 255; sixteen bits is 16 bits with a maximum of 65535; ASCII uses seven bits for 128 characters. These ten items fix the units, the weights and the bit counts.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 3 · Intermediate 3 · Challenge 3 · Error redo 1 |
| Chapter | Chapter: S6 ICT: Data Representation and Number Systems |
| Level | Basics (10 items) |
02 Questions (10 items)
- FoundationHow many bits are in one byte, and how many in three bytes?
- FoundationConvert the binary number 1011 to denary.
- FoundationWhat are binary 1001 and 1101 in denary?
- IntermediateConvert denary 25 to binary.
- IntermediateConvert hexadecimal 2F to denary.
- IntermediateWhat is the largest value an unsigned 8-bit integer can hold?
- ChallengeSixteen bits is how many bytes, and what is the largest unsigned value?
- ChallengeHow many distinct values can a 4-bit nibble hold?
- ChallengeStandard ASCII uses seven bits; how many characters can it represent?
- Error redoError item: binary digits can be any digit from 0 to 9. What is correct?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 1 byte = 8 bits; 3 bytes = 24 bits. | A byte is eight bits, so multiply by eight. |
| 2 | 11. 1×8 + 0x4 + 1×2 + 1×1 = 11. | Weights run 8, 4, 2, 1 from the left; add the ones that are set. |
| 3 | 1001 = 9 and 1101 = 13. | 1001 is 8+1 and 1101 is 8+4+1. |
| 4 | 11001, which is 16 + 8 + 1. | Start from the largest place value under 25 and keep splitting the remainder. |
| 5 | 47, because 2×16 + 15 = 47. | The left digit is worth sixteen and F counts as fifteen. |
| 6 | 255, which is 2^8 – 1. | All eight bits set gives 128+64+32+16+8+4+2+1 = 255. |
| 7 | Two bytes, and the largest value is 65,535 (2^16 – 1). | Sixteen divided by eight is two, and the range runs from 0 to 65,535. |
| 8 | Sixteen, from 0 to 15, which maps exactly onto one hex digit. | Two to the fourth is sixteen, so one hex digit replaces four bits. |
| 9 | 128, because 2^7 = 128. | All seven bits are used, giving codes 0 to 127. |
| 10 | Binary uses only the digits 0 and 1, which is why it is called base-2. | Treating 0-9 as binary digits is the most common first mistake. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Want to convert binary, hexadecimal and file sizes with confidence? Book a TutorZone tutor and work through all ten items on bits, bytes and storage in 25 minutes.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



