S6 ICT: data representation and number systems (intermediate)
- 2026-11-20
S6 ICT: data representation and number systems (intermediate)
Going further: digit-by-digit hex conversion, colour depth, audio size and negative two’s complement values.
Intermediate: hex, colour depth and two’s complement At this level conversion runs both ways. One hex digit is exactly four bits, so B7 is 1011 0111 (183) and 1100 1010 is CA (202). 24-bit colour gives 2^24 = 16777216 colours. Image size is pixels times three: 800x600x3 = 1440000 bytes, about 1.37 MB. Audio size is sample rate times bytes times seconds: 44,100 x 2 x 60 = 5292000 bytes, about 5.05 MB. The 8-bit two’s complement range is -128 to 127, so -5 is 256 – 5 = 251, written 11111011. A 12-bit unsigned field tops out at 4095, and Unicode spans U+0000 to U+10FFFF for 1114111 code points.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 3 · Intermediate 3 · Challenge 3 · Error redo 1 |
| Chapter | Chapter: S6 ICT: Data Representation and Number Systems |
| Level | Intermediate (10 items) |
02 Questions (10 items)
- FoundationConvert hexadecimal B7 into binary, digit by digit.
- FoundationConvert binary 1100 1010 to hexadecimal.
- FoundationHow many colours can 24-bit colour depth represent?
- IntermediateAn uncompressed 800×600 image at 24-bit colour takes how many bytes, and roughly how many MB?
- IntermediateA 44,100 Hz 16-bit mono recording lasting 60 seconds takes how many bytes, and roughly how many MB?
- IntermediateWhat range of integers can 8-bit two’s complement represent?
- ChallengeHow is -5 written in 8-bit two’s complement?
- ChallengeWhat is the largest 12-bit unsigned value?
- ChallengeHow do ASCII and Unicode differ in character-set size?
- Error redoError item: the hex digit F stands for 16. What is correct?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 1011 0111, because B = 1011 and 7 = 0111. | Each hex digit becomes exactly four bits, padded with leading zeros. |
| 2 | CA, since 1100 = C and 1010 = A. | Group four bits from the right and read off each hex digit. |
| 3 | 16,777,216, which is 2^24. | Eight bits each for red, green and blue, so 256 cubed. |
| 4 | 1,440,000 bytes, about 1.37 MB. | 800 x 600 x 3 = 1,440,000, then divide by 1,048,576. |
| 5 | 5,292,000 bytes, about 5.05 MB. | 44,100 samples per second times two bytes times sixty seconds. |
| 6 | From -128 to 127. | The leftmost bit is the sign bit and the range splits evenly. |
| 7 | 1111 1011, which is 251 unsigned. | Take 256 – 5 = 251 and write it as eight bits. |
| 8 | 4,095, which is 2^12 – 1. | All twelve bits set, typical of a 12-bit ADC reading. |
| 9 | ASCII has 128 code points; Unicode spans U+0000 to U+10FFFF, 1,114,112 code points. | ASCII cannot store Chinese characters, whereas Unicode covers every script. |
| 10 | F stands for 15; hex digits run 0 to F, sixteen values with F as the largest, worth fifteen. | Confusing “sixteen values” with “the value sixteen” breaks every carry. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Want to convert binary, hexadecimal and file sizes with confidence? Book a TutorZone tutor and work through all ten items on bits, bytes and storage in 25 minutes.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



