S6 ICT: network models and OSI encapsulation (intermediate)
- 2026-11-20
S6 ICT: network models and OSI encapsulation (intermediate)
Intermediate: header percentages, subnet addresses, handshakes, total overhead and path delay, each shown with its division.
Intermediate: percentages, subnets, delay The second paper puts numbers to work. In a 1058 byte frame the 58 bytes of header take 5.48 percent, the IP header alone 1.89 percent and the Ethernet header and trailer 1.7 percent, which add up exactly. A slash 24 subnet has 256 addresses, leaving 254 usable; the 1518 byte maximum frame minus 18 bytes gives 1500, exactly the MTU, showing they differ. TCP opens with 3 segments, five packets carry 290 bytes of header, and 4 links at 2 milliseconds give 8. It ends on UDP and ARP.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 3 · Intermediate 3 · Challenge 3 · Error redo 1 |
| Chapter | Chapter: S6 ICT: Network Models and OSI Encapsulation |
| Level | Intermediate (10 items) |
02 Questions (10 items)
- FoundationIn a 1058 byte frame, what percentage of the whole frame is taken by headers and trailer, to two decimal places?
- FoundationIn the same frame, what share does the IP header take, and what share the Ethernet header and trailer?
- FoundationHow many usable host addresses does a slash 24 subnet provide?
- IntermediateThe maximum Ethernet frame is 1518 bytes. After the 18 bytes of header and trailer, what is the payload limit?
- IntermediateAfter layer four adds a 20 byte header to 1000 bytes of application data, what is the length?
- IntermediateHow many segments are exchanged to open a TCP connection?
- ChallengeFive packets each carry 1000 bytes of data. What is the total header overhead?
- ChallengeA path has 4 links with 2 ms one way delay each. What is the total one way delay?
- ChallengeBetween which two layers does ARP operate?
- Error redoError item: UDP is fast so it must be connection oriented. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 5.48 percent. | 58 divided by 1058 gives 5.48 percent. |
| 2 | IP takes 1.89 percent and Ethernet 1.7 percent. | 20 over 1058 is 1.89 percent; 18 over 1058 is 1.7 percent, and the three shares add to 5.48 percent. |
| 3 | 254. | There are 256 addresses; removing the network and broadcast addresses leaves 254. |
| 4 | 1500 bytes, exactly the standard MTU. | That is why the MTU is 1500; it is not the same thing as the 1518 byte frame. |
| 5 | 1020 bytes. | Every added header increases the length by that header size. |
| 6 | 3. | They are SYN, SYN-ACK and ACK, the three way handshake. |
| 7 | 290 bytes. | 58 times five gives 290, still 5.48 percent of the 5000 bytes of data. |
| 8 | 8 milliseconds. | 4 times 2 is 8; a round trip needs 16 milliseconds. |
| 9 | Between the network layer and the data link layer. | ARP resolves an IP address to a MAC address so the frame can be built. |
| 10 | Wrong: UDP is connectionless; it is fast because it neither handshakes nor retransmits. | Reliability and speed are a trade off, not a cause and effect. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Want to trace encapsulation hop by hop? Book a TutorZone tutor and unpack all ten items layer by layer in 25 minutes.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



