S6 ICT: network model error rework
- 2026-11-20
S6 ICT: network model error rework
Ten common layering misconceptions, each corrected with one line of explanation.
Error rework: ten common slips This paper lists ten common misconceptions: encapsulation treated as stripping headers, a switch forwarding by IP, a router stopping at layer two, the MTU confused with the maximum frame, UDP needing a handshake, a port treated as part of the IP address, layer one called the application layer, headers assumed not to change length, frame and packet used interchangeably, and TLS described as layer three encryption. Each item names the error and gives the correct rule with one line of explanation.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 3 · Intermediate 3 · Challenge 3 · Error redo 1 |
| Chapter | Chapter: S6 ICT: Network Models and OSI Encapsulation |
| Level | Error rework (10 items) |
02 Questions (10 items)
- FoundationMisconception one: encapsulation means stripping headers layer by layer.
- FoundationMisconception two: a switch forwards by IP address.
- FoundationMisconception three: a router only works up to layer two.
- IntermediateMisconception four: MTU is the maximum frame length.
- IntermediateMisconception five: UDP also needs a three way handshake.
- IntermediateMisconception six: the port number is part of the IP address.
- ChallengeMisconception seven: layer one of OSI is the application layer.
- ChallengeMisconception eight: adding headers does not change the length.
- ChallengeMisconception nine: a frame and a packet are the same thing.
- Error redoMisconception ten: TLS is layer three encryption.
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Wrong: the sender adds headers; only the receiver strips them. | Reversing encapsulation and decapsulation is the most common first error. |
| 2 | Wrong: a switch forwards by MAC address at layer two. | It is the router that forwards by IP address at layer three. |
| 3 | Wrong: a router strips to layer three to read the IP address. | Every router hop therefore adds one more network layer decapsulation. |
| 4 | Wrong: the MTU is the 1500 byte layer three payload while the maximum frame is 1518 bytes. | The two differ by the 18 bytes of layer two header and trailer. |
| 5 | Wrong: UDP is connectionless and simply sends. | The handshake belongs to TCP when opening a reliable connection. |
| 6 | Wrong: the IP address sits at the network layer and the port at the transport layer. | Only the pair together forms a socket. |
| 7 | Wrong: layer one is the physical layer and the application layer is layer seven. | Numbers increase upwards, so a reversed direction ruins every later item. |
| 8 | Wrong: every layer adds a header, so 1000 bytes becomes a 1058 byte frame. | The 58 bytes are the sum of the three headers. |
| 9 | Wrong: a packet is the layer three unit and a frame the layer two unit. | The same data carries a different name at each layer. |
| 10 | Wrong: TLS rides on TCP between the application and transport layers. | TLS therefore protects content end to end rather than hop by hop IP packets. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Want to trace encapsulation hop by hop? Book a TutorZone tutor and unpack all ten items layer by layer in 25 minutes.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



