/en-tutor-prep-s6-maths-second-derivative-curve-sketching/
/en-tutor-prep-s6-maths-second-derivative-curve-sketching/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Secondary Maths (DSE) | Second Derivative and Curve Sketching: Tutor Prep Guide | Read the sign, not the size

Secondary Maths (DSE) | Second Derivative and Curve Sketching: Tutor Prep Guide | Read the sign, not the size

  • 2026-11-22

Students can recite that a positive second derivative means a minimum, then fall apart on points of inflexion because nobody made them say the word concavity.

Objectives — By the end the student can: differentiate x cubed minus 6x squared plus 9x plus 1 into 3 times x minus 1 times x minus 3 and state the stationary points at x equals 1 and x equals 3; use a second derivative of minus 6 at 1 for a maximum of 5 and plus 6 at 3 for a minimum of 1, and explain what the sign means; solve the second derivative equals zero to get x equals 2 and confirm a point of inflexion at 2 comma 3; and classify x to the fourth minus 4x squared, giving a maximum at 0, minima at plus and minus 1.414 and inflexions at plus and minus 0.816.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Differentiating What is the derivative of x cubed? 3x squared
Solving a quadratic Solve 3x squared minus 12x plus 9 equals zero x equals 1 or x equals 3
Solving an inequality For what x is 6x minus 12 greater than zero? x greater than 2

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-5 min Prior check Differentiate, solve a quadratic, solve a linear inequality Two of three correct before moving on
5-14 min Stationary points Factorise 3x squared minus 12x plus 9 into 3 times x minus 1 times x minus 3 Student writes x equals 1 and x equals 3
14-24 min The second derivative Differentiate again to get 6x minus 12, then substitute 1 and 3 Student gets minus 6 and plus 6
24-34 min Function values f of 1 is 5 and f of 3 is 1 Student writes the maximum at 1 comma 5 and the minimum at 3 comma 1
34-44 min Points of inflexion Second derivative zero at x equals 2, negative to the left and positive to the right Student gets the point 2 comma 3
44-54 min A quartic Second derivative 12x squared minus 8 is negative at 0 and positive at plus or minus 1.414 Student finds inflexions at plus and minus 0.816
54-60 min Exit check Ask whether a zero second derivative always means an inflexion No, the sign has to change

03 Teaching script (read it out)

Scene 1: Stationary points first, classification second

Write f of x as x cubed minus 6x squared plus 9x plus 1. The first derivative is 3x squared minus 12x plus 9, which factorises as 3 times x minus 1 times x minus 3, so the stationary points are at x equals 1 and x equals 3. None of this uses the second derivative, and the points have to be found before anything can be classified.

Now differentiate again: 6x minus 12. Substituting 1 gives minus 6, a negative number, so the curve bends downwards there and the point is a maximum. Substituting 3 gives plus 6, so the curve bends upwards and the point is a minimum. Make the student say the whole sentence: negative is a maximum, positive is a minimum, zero needs a second look. Once that sentence is fluent, the chapter is basically done.

Student must say: what do a negative, positive and zero second derivative each mean?

Scene 2: An inflexion needs a sign change, not just a zero

Setting the second derivative to zero gives 6x minus 12 equals zero, so x equals 2. That is only a candidate. Check both sides: at x equals 1 the second derivative is minus 6 and at x equals 3 it is plus 6, so the sign really does change and x equals 2 is a point of inflexion, with f of 2 equal to 3, giving the point 2 comma 3.

The counterexample must be taught: for g of x equals x to the fourth, the second derivative is 12x squared, which is zero at 0, but it is positive on both sides, so the concavity does not change and 0 comma 0 is a minimum rather than an inflexion. After that contrast, no student will treat a zero second derivative as the definition of an inflexion.

Student must say: why is 0 not a point of inflexion for x to the fourth?

Scene 3: A quartic: four candidates, two turning points and two inflexions

For g of x equals x to the fourth minus 4x squared, the first derivative is 4x cubed minus 8x, which is 4x times x squared minus 2, so the stationary points are at 0 and at plus or minus 1.414. The second derivative is 12x squared minus 8: at 0 it is minus 8, so 0 is a maximum with value 0; at plus or minus 1.414 it is 16, so both are minima with value minus 4.

Setting the second derivative to zero gives x squared equals two thirds, so x is plus or minus 0.816. Check the sign: at 0 the second derivative is minus 8 and at 1 it is plus 4, so both of those points are inflexions and the function value there is about minus 2.222. Finish by making the student read the five numbers as one sentence: maximum 0, minima minus 4, inflexions at plus and minus 0.816.

Student must say: why can a quartic have two minima?

04 Question types and worked steps

Type Example Steps Answer
Stationary points 3x squared minus 12x plus 9 Factorise as 3 times x minus 1 times x minus 3 x equals 1 or x equals 3
Classification Second derivative minus 6 at 1 and plus 6 at 3 Read the sign only Maximum 5 and minimum 1
Point of inflexion 6x minus 12 equals zero Find the root, then check both sides x equals 2, giving 2 comma 3
Concavity intervals 12x squared minus 8 Solve the sign of the quadratic Downwards within 0.816 of zero, upwards outside
Sanity check (teach this): Three sanity checks: stationary points come from the first derivative, since setting the second derivative to zero only finds inflexion candidates; a maximum must be larger than a minimum, and 5 is larger than 1, so reversed values mean the classification is wrong; and a cubic has at most one inflexion, so finding two means one of them had no sign change.

05 Independent practice (3 questions)

Question Answer What to watch
Classify Stationary points at 1 and 3 for the cubic Maximum at 1, minimum at 3
Inflexion Second derivative 6x minus 12 x equals 2, so the point is 2 comma 3
Concavity Second derivative 12x squared minus 8 at 0 and at 1 Downwards at 0, upwards at 1

06 Common mistakes and what to say

Mistake Student writes Say this
Treating a zero second derivative as an inflexion Solving to x equals 2 and writing the point of inflexion straight away Zero only makes it a candidate. The sign must change, so write negative on the left and positive on the right.
Reversing maximum and minimum Calling minus 6 at x equals 1 a minimum Negative means the curve bends downwards like a cap, so it is a maximum. Cap is maximum, cup is minimum.
Forgetting the function value Writing that the maximum is at x equals 1 A turning point needs two coordinates. f of 1 is 5, so the answer is 1 comma 5, and a bare x value loses marks.
Confusing stationary points with endpoints Treating the ends of the curve as extremes The derivative need not vanish at an endpoint. Decide first whether the domain is closed, then check the endpoints separately.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Meaning of the second derivative Negative maximum, positive minimum, zero needs checking If unclear, repeat the sentence
Inflexion condition Zero plus a change of sign A bare zero means repeating the x to the fourth example
Writing an extreme point As a coordinate pair such as 1 comma 5 A bare x value means one more question

09 Tutor FAQ

What if the second derivative test fails

When the second derivative is zero the test gives no answer, so go back to the first derivative and check the sign on both sides, or compare nearby function values. Do not force a conclusion from the second derivative.

Why bother finding points of inflexion

They are where the concavity changes, so the sketch bends the other way. Almost every curve sketching question expects them, and leaving them out makes the shape wrong.

Can a cubic have two points of inflexion

No. The second derivative of a cubic is linear, so it has one root at most, which means one inflexion. Finding two means an arithmetic slip or a turning point mistaken for an inflexion.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →