S6 Physics Electromagnetic Induction Practice (Paper 1: Basics)
- 2026-11-17
S6 Physics Electromagnetic Induction Practice (Paper 1: Basics)
Start from flux and Faraday law, then find the emf and current of a rod cutting field lines and the flux in a coil.
Separate flux from its rate of change Paper 1 builds the base: flux is B times A times cosine of the angle in webers, while Faraday law speaks of the rate of change of flux, not the flux itself. A 0.40 m rod cutting a 0.50 T field at 2.0 m/s then gives an emf of 0.40 V and a current of 2.0 A, and 200 turns changing by 0.020 Wb in 0.20 s give 20 V.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 3 · Intermediate 3 · Challenge 3 · Error redo 1 |
| Chapter | Chapter: S6 Physics: Electromagnetic Induction |
| Level | Basics (S6) |
02 Questions (10 items)
- FoundationWhat is magnetic flux?
- FoundationAccording to Faraday law, what is the induced emf proportional to?
- FoundationA 0.40 m rod cuts a 0.50 T field at 2.0 m/s at right angles. What emf is induced?
- IntermediateIn the same circuit the total resistance is 0.20 ohm. What is the induced current?
- IntermediateWhat does Lenz law say about the direction of the induced current?
- IntermediateA 200 turn coil sees its flux rise from 0.010 Wb to 0.030 Wb in 0.20 s. Find the average emf.
- ChallengeA coil of area 0.050 m squared sits perpendicular to a 0.80 T field. What is the flux?
- ChallengeIf a rod moves parallel to the field lines, is an emf induced?
- ChallengeA magnet is pushed into a coil quickly or slowly. Which gives the larger emf?
- Error redoA student claims a coil at rest in a very strong uniform field carries an induced current. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Flux density times coil area times the cosine of the angle, measured in webers | The formula is B times A times cosine of the angle, so only the component perpendicular to the coil counts. |
| 2 | The rate of change of magnetic flux | The faster the flux changes, the larger the emf, and a constant flux gives zero emf. |
| 3 | 0.40 V | The emf is B times L times v, that is 0.50 times 0.40 times 2.0, giving 0.40 V. |
| 4 | 2.0 A | Current is emf divided by resistance, so 0.40 divided by 0.20 gives 2.0 A. |
| 5 | It opposes the change of magnetic flux that produced it | The field of the induced current hinders the increase or the decrease of the original flux. |
| 6 | 20 V | Each turn changes by 0.020 Wb, which over 0.20 s gives 0.10 V per turn, so 200 turns give 20 V. |
| 7 | 0.040 Wb | Flux is B times A, so 0.80 times 0.050 gives 0.040 Wb. |
| 8 | No | Moving parallel to the field keeps the flux through the circuit unchanged, so the rate of change is zero. |
| 9 | The quick push gives the larger emf | A quick push changes the flux faster, and by Faraday law a faster change gives a larger emf. |
| 10 | It ignores that a changing flux is needed for an induced emf | However strong the field, a steady flux has a zero rate of change, so the induced current is zero. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
After paper 1, use paper 2 for back substitution of flux density, coil rate of change, power and magnetic force.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



