S6 Physics Electromagnetic Induction Practice (Paper 2: Intermediate)
- 2026-11-17
S6 Physics Electromagnetic Induction Practice (Paper 2: Intermediate)
Practise back substitution for flux density, the rate of change in a coil, and follow the emf through to current, power and magnetic force.
From emf to power and force Paper 2 goes deeper: after separating flux density from flux, 0.75 V across a 0.50 m rod at 3.0 m/s gives a flux density of 0.50 T. A 50 turn coil of area 0.020 m squared rising from 0.20 T to 0.60 T in 0.40 s changes flux by 0.0080 Wb and gives 1.0 V. A 0.25 m rod cutting 0.60 T at 4.0 m/s gives 0.60 V, then 0.40 A, 0.24 W and 0.060 N.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 3 · Intermediate 3 · Challenge 3 · Error redo 1 |
| Chapter | Chapter: S6 Physics: Electromagnetic Induction |
| Level | Intermediate (S6) |
02 Questions (10 items)
- FoundationWhat is the difference between flux density and magnetic flux?
- FoundationHow is Lenz law linked to conservation of energy?
- FoundationWhen a generator coil lies perpendicular to the field, what happens to flux and emf?
- IntermediateA 0.50 m rod cuts a field at 3.0 m/s and gives 0.75 V. Find the flux density.
- IntermediateA 50 turn coil of area 0.020 m squared sees the field rise from 0.20 T to 0.60 T in 0.40 s. Find the average emf.
- IntermediateA 0.25 m rod cuts a 0.60 T field at 4.0 m/s at right angles. What emf is induced?
- ChallengeIn the same circuit the total resistance is 1.5 ohm. What is the induced current?
- ChallengeWhat electrical power is dissipated in that circuit?
- ChallengeWhat magnetic force acts on that rod?
- Error redoA student says the induced emf is proportional to the flux. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Flux density is flux per unit area, while flux is the total through the whole area | Flux density is measured in teslas and flux in webers, the two differ by a factor of area. |
| 2 | The induced current opposes the motion, so work must be done and mechanical energy becomes electrical energy | If the induced current helped the motion, energy would appear from nothing, which is impossible. |
| 3 | Flux is at its maximum and emf is zero | At the maximum flux the rate of change is zero, so the emf is zero at that instant. |
| 4 | 0.50 T | Flux density is emf divided by the product of length and speed, so 0.75 divided by 1.5 gives 0.50 T. |
| 5 | 1.0 V | The flux changes by 0.020 times 0.40, giving 0.0080 Wb, and 50 turns over 0.40 s give 1.0 V. |
| 6 | 0.60 V | The emf is B times L times v, so 0.60 times 0.25 times 4.0 gives 0.60 V. |
| 7 | 0.40 A | Current is emf divided by resistance, so 0.60 divided by 1.5 gives 0.40 A. |
| 8 | 0.24 W | Power is emf times current, so 0.60 times 0.40 gives 0.24 W. |
| 9 | 0.060 N | The force is B times I times L, so 0.60 times 0.40 times 0.25 gives 0.060 N. |
| 10 | It should be proportional to the rate of change of flux | When the flux is large but steady the induced emf is still zero. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Then use paper 3 for larger cutting figures, the peak emf of a generator and an ideal transformer.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



