S6 Physics Electromagnetic Induction Practice (Paper 3: Challenge)
- 2026-11-17
S6 Physics Electromagnetic Induction Practice (Paper 3: Challenge)
Track where the energy goes with larger figures, then compute the peak emf of a generator and the turns and current of an ideal transformer.
Energy flow and peak emf Paper 3 is the challenge set: a 0.50 m rod at 5.0 m/s in 0.80 T gives 2.0 V, then 4.0 A and 1.6 N with 0.50 ohm, and the external power of 8.0 W matches the electrical power. A 400 turn coil changing 0.0075 Wb in 0.10 s gives 30 V, a 100 turn coil at 50 revolutions per second gives about 188 V, and a 240 V to 12 V transformer needs 50 secondary turns with 0.20 A primary at 4.0 A secondary.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 3 · Intermediate 3 · Challenge 3 · Error redo 1 |
| Chapter | Chapter: S6 Physics: Electromagnetic Induction |
| Level | Challenge (S6) |
02 Questions (10 items)
- FoundationA 0.50 m rod cuts a 0.80 T field at 5.0 m/s at right angles. What emf is induced?
- FoundationIn that circuit the total resistance is 0.50 ohm. What is the induced current?
- FoundationWhat magnetic force acts on that rod?
- IntermediateWhat external power keeps that rod moving at constant speed?
- IntermediateA 400 turn coil of area 0.015 m squared sees the field rise from zero to 0.50 T in 0.10 s. Find the average emf.
- IntermediateA 100 turn coil of area 0.020 m squared turns at 50 revolutions per second in a 0.30 T field. Find the peak emf.
- ChallengeAn ideal transformer has 1000 primary turns at 240 V and must deliver 12 V. How many secondary turns are needed?
- ChallengeIf the secondary current is 4.0 A, what is the primary current?
- ChallengeWhat phenomenon do induction cookers and eddy current brakes share?
- Error redoA student judges the largest emf at the moment of maximum flux. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 2.0 V | The emf is B times L times v, so 0.80 times 0.50 times 5.0 gives 2.0 V. |
| 2 | 4.0 A | Current is emf divided by resistance, so 2.0 divided by 0.50 gives 4.0 A. |
| 3 | 1.6 N | The force is B times I times L, so 0.80 times 4.0 times 0.50 gives 1.6 N. |
| 4 | 8.0 W | Power is force times speed, so 1.6 times 5.0 gives 8.0 W, the same as emf times current. |
| 5 | 30 V | The flux changes by 0.015 times 0.50, giving 0.0075 Wb, and 400 turns over 0.10 s give 30 V. |
| 6 | About 188 V | The peak is N times B times A times angular speed, and 2 pi times 50 is about 314, giving about 188 V. |
| 7 | 50 turns | The turns ratio equals the voltage ratio, and 240 over 12 is 20, so 1000 divided by 20 gives 50 turns. |
| 8 | 0.20 A | An ideal transformer conserves power, so 240 times 0.20 equals 12 times 4.0. |
| 9 | Eddy currents | A changing field induces circulating currents inside metal, producing heat or a braking force. |
| 10 | The emf depends on the rate of change, which is zero when the flux is at its maximum | A generator coil perpendicular to the field has maximum flux but zero emf at that instant. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Finish with paper 4 to retry four weak spots: units and formulas, current and power, doubling the turns and the rate of change.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



