S6 Physics Electromagnetic Induction Practice (Paper 4: Retry)
- 2026-11-17
S6 Physics Electromagnetic Induction Practice (Paper 4: Retry)
Retry four weak spots: formulas and units, current and power, a coil at rest and doubled turns, and the misunderstanding of the rate of change.
The four weak spots again Paper 4 is a retry set: a 0.30 m rod cutting 0.50 T at 6.0 m/s gives 0.90 V, then 0.30 A and 0.27 W with 3.0 ohm. A 100 turn coil of area 0.040 m squared changing 0.0080 Wb in 0.20 s gives 4.0 V, a 0.25 m squared coil in 0.40 T holds 0.10 Wb, and the set closes by separating flux from its rate of change.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 3 · Intermediate 3 · Challenge 3 · Error redo 1 |
| Chapter | Chapter: S6 Physics: Electromagnetic Induction |
| Level | Retry (S6) |
02 Questions (10 items)
- FoundationWhat decides the size of an induced emf?
- FoundationA 0.30 m rod cuts a 0.50 T field at 6.0 m/s at right angles. What emf is induced?
- FoundationIn that circuit the total resistance is 3.0 ohm. What is the induced current?
- IntermediateWhat electrical power does that circuit dissipate?
- IntermediateA 100 turn coil of area 0.040 m squared sees the field rise from 0.10 T to 0.30 T in 0.20 s. Find the average emf.
- IntermediateA coil of area 0.25 m squared sits perpendicular to a 0.40 T field. What is the flux?
- ChallengeWhich law gives the direction of the induced current?
- ChallengeA coil sits at rest in a uniform field. What induced current flows?
- ChallengeThe turns rise from 100 to 200 with everything else unchanged. What happens to the emf?
- Error redoA student thinks a larger flux always gives a larger emf. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | The rate of change of flux and the number of turns | The emf is N times the flux change divided by the time taken, so both matter. |
| 2 | 0.90 V | The emf is B times L times v, so 0.50 times 0.30 times 6.0 gives 0.90 V. |
| 3 | 0.30 A | Current is emf divided by resistance, so 0.90 divided by 3.0 gives 0.30 A. |
| 4 | 0.27 W | Power is emf times current, so 0.90 times 0.30 gives 0.27 W. |
| 5 | 4.0 V | The flux changes by 0.040 times 0.20, giving 0.0080 Wb, and 100 turns over 0.20 s give 4.0 V. |
| 6 | 0.10 Wb | Flux is B times A, so 0.40 times 0.25 gives 0.10 Wb. |
| 7 | Lenz law | The induced current opposes the change of flux, and Lenz law fixes its direction. |
| 8 | Zero | The flux does not change, so the rate of change is zero and no current flows. |
| 9 | It doubles | The emf is proportional to the number of turns, so doubling the turns doubles the emf. |
| 10 | It confuses the flux with its rate of change | A large but steady flux induces nothing, only a change can produce an emf. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Once all four papers are done, revisit the flux and rate of change diagrams on the chapter page, then move to the next chapter.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



