S6 Physics | Interference, Diffraction and Gratings Paper 1 (Foundation)
- 2026-11-16
S6 Physics | Interference, Diffraction and Gratings Paper 1 (Foundation)
Keep two formulas apart: fringe spacing y = λL ÷ d for two slits, and d sin θ = nλ for a grating; convert every length to metres first.
Attempt first, mark afterwards Allow about twenty-five minutes; write the formula, then convert nanometres and millimetres to metres before substituting.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 items |
| Suggested time | About 25 minutes |
| Difficulty mix | Foundation 10 |
| Chapter | Chapter: S6 Physics | Interference, Diffraction and Gratings |
| Level | S6 (Secondary 6) Physics |
02 Questions (10 items)
- FoundationTwo slits 0.30 mm apart are 2.0 m from a screen and lit by 600 nm light. Find the fringe spacing.
- FoundationThe slit separation is changed to 0.60 mm with everything else fixed. What is the new spacing?
- FoundationThe same double-slit set-up is lit by 400 nm light. Find the fringe spacing.
- FoundationA grating has 500 lines per millimetre. What is its slit spacing d?
- FoundationThe same grating (d = 2.0 micrometres) is lit normally by 600 nm light. Find the first-order diffraction angle.
- FoundationFor the same grating and light, at what angle does the second-order maximum appear?
- FoundationWith the same grating (d = 2.0 micrometres) and 600 nm light, what is the highest visible order?
- FoundationIn a double-slit experiment, what condition gives constructive interference (a bright fringe)?
- FoundationIn single-slit diffraction the slit width is halved. What happens to the central maximum width?
- FoundationWhite light falls normally on a grating. How are the central and side maxima coloured?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Spacing = λL / d = 600 x 10^-9 x 2.0 ÷ 0.30 x 10^-3 = 4.0 mm. | Convert everything to metres first, then report in millimetres. |
| 2 | 2.0 mm. Doubling the separation halves the spacing, an inverse relation. | Spacing is inversely proportional to separation and proportional to wavelength and distance. |
| 3 | 400 x 10^-9 x 2.0 ÷ 0.30 x 10^-3 = 2.67 mm. Shorter wavelength gives closer fringes. | Halving the wavelength shrinks the spacing in proportion. |
| 4 | d = 1 ÷ 500 mm = 2.0 x 10^-3 mm = 2.0 x 10^-6 m, that is 2.0 micrometres. | Take the reciprocal of the lines per millimetre. |
| 5 | sin θ = nλ / d = 600 x 10^-9 ÷ 2.0 x 10^-6 = 0.300, so θ = 17.5 degrees. | Use the grating equation d sin θ = nλ with n the order. |
| 6 | sin θ = 2 x 0.300 = 0.600, so θ = 36.9 degrees. Higher orders sit at larger angles. | In second order the path difference is two wavelengths. |
| 7 | The largest n is d / λ = 2.0 x 10^-6 ÷ 600 x 10^-9 = 3.33, so only the third order fits. | sin θ cannot exceed one, which caps the order. |
| 8 | The path difference from the two slits is a whole number of wavelengths, Δ = nλ. | Constructive means whole wavelengths, destructive means odd half wavelengths. |
| 9 | It doubles, that is it becomes wider. Narrower slits spread light more. | Central width is inversely proportional to slit width. |
| 10 | The centre is white because every colour has zero path difference; the side maxima spread into a spectrum with red deviated most and violet least. | Longer wavelength means larger sin θ, so red sits furthest out. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Want more practice? Download or print the full paper; answers with one-line explanations are included for quick checking.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



