/en-tutor-prep-s6-physics-interference-diffraction-grating-practice-3/
/en-tutor-prep-s6-physics-interference-diffraction-grating-practice-3/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S6 Physics | Interference, diffraction and gratings – challenge paper (10 questions with answers)

S6 Physics | Interference, diffraction and gratings – challenge paper (10 questions with answers)

  • 2026-11-16

S6 Physics | Interference, diffraction and gratings – challenge paper (10 questions with answers)

Paper three pushes interference and diffraction to their limits: the m-th fringe, wavelength in a medium, single-slit central width, grazing condition and resolving power.

Three limits behind the challenge items: maximum order, slit width and resolving power Hard items ask whether a fringe still exists and whether two lines can be separated. The order limit is n ≤ d ÷ λ, the central single-slit width is 2λL ÷ a, a medium changes the wavelength to λ ÷ n, and resolving power is R = λ ÷ Δλ = nN. Keep units at every step.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Challenge 9 · Error redo 1
Chapter Chapter: S6 Physics | Interference, diffraction and gratings
Level Level: challenge items covering single-slit width, wavelength in a medium and resolving power

02 Questions (10 items)

  1. ChallengeA double slit has spacing 0.20 mm and the screen is 2.0 m away; the light is 450 nm blue. How far is the third bright fringe from the centre?
  2. ChallengeIn the same set-up (d = 0.20 mm, L = 2.0 m) the third bright fringe is 9.0 mm from the centre. Find the wavelength.
  3. ChallengeA grating has 600 lines per millimetre. With 500 nm light at normal incidence, find the first and second order angles.
  4. ChallengeWith the same grating (d = 1.67 micrometres), what wavelength makes the second order just graze the surface at 90 degrees?
  5. ChallengeA grating has 1000 lines per millimetre. With 600 nm light at normal incidence, how many orders are visible?
  6. ChallengeA double-slit set-up gives 4.0 mm fringe spacing in air. It is then immersed in water of refractive index 1.33. Find the new spacing.
  7. ChallengeA single slit 0.10 mm wide is lit by 600 nm light and the screen is 2.0 m away. Find the width of the central maximum.
  8. ChallengeA grating has 250 lines per millimetre and is lit normally by 480 nm light. Find the first-order angle and the maximum order.
  9. ChallengeSodium light contains lines at 589.0 nm and 589.6 nm. How many lines must a grating have to resolve them in the first order?
  10. Error redoA student writes d = 500 mm for a grating with 500 lines per millimetre, so sin θ comes out almost zero. What is the correct d?

03 Answers and one-line notes

# Answer One-line note
1 y₃ = 3λL ÷ d = (3 × 450 × 10⁻⁹ × 2.0) ÷ (0.20 × 10⁻³) = 1.35 × 10⁻² m, that is 13.5 mm. The m-th bright fringe sits at mλL ÷ d; λL ÷ d is only the gap between neighbouring fringes.
2 λ = y₃ d ÷ (3L) = (9.0 × 10⁻³ × 0.20 × 10⁻³) ÷ (3 × 2.0) = 3.0 × 10⁻⁷ m, that is 300 nm in the ultraviolet. When reversing the formula the numerator carries m and the denominator carries the order times the screen distance.
3 d = 1.67 micrometres; sin θ₁ = 0.300 gives 17.5 degrees and sin θ₂ = 0.600 gives 36.9 degrees. Doubling the order doubles sin θ, not the angle, so each angle needs its own inverse sine.
4 nλ = d sin 90 degrees gives λ = d ÷ 2 = 0.83 micrometres, about 833 nm, which is infrared, so both orders stay on the screen for visible light. Grazing means nλ = d, the boundary that decides whether an order exists at all.
5 d = 1.0 micrometre; d ÷ λ = 1.67, which rounds down to 1, so only the first order appears; the second would need sin θ above 1. Denser lines mean fewer orders; a thousand lines per millimetre is already close to the wavelength scale.
6 The wavelength in water is λ ÷ 1.33, so the spacing becomes 4.0 ÷ 1.33, about 3.0 mm. Frequency is unchanged, so the shorter wavelength in the medium narrows the fringes.
7 Central width = 2λL ÷ a = (2 × 600 × 10⁻⁹ × 2.0) ÷ (1.0 × 10⁻⁴) = 2.4 × 10⁻² m, that is 24 mm. The first minima sit one on each side of the centre, so the width is 2λL ÷ a, not λL ÷ a.
8 d = 4.0 micrometres; sin θ = 480 × 10⁻⁹ ÷ 4.0 × 10⁻⁶ = 0.12, so θ is about 6.9 degrees, and d ÷ λ = 8.33 gives a maximum of the eighth order. The angle and the order are separate questions: get sin θ first, then round d ÷ λ down.
9 R = λ ÷ Δλ = 589.0 ÷ 0.6 = 982, so 982 lines are needed in the first order, since nN = R. Resolving power is R = nN, so a smaller Δλ needs more lines.
10 d = 1 mm ÷ 500 = 2.0 × 10⁻³ mm, that is 2.0 micrometres. Line density is a reciprocal: 500 lines share 1 mm, so neighbouring slits are only 2 micrometres apart.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

If sin θ comes out above 1, that order does not exist, so the complete answer is that it is absent.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →