/en-tutor-prep-ib-biology-enzymes-metabolism/
/en-tutor-prep-ib-biology-enzymes-metabolism/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

IB Biology: Enzymes and Metabolism Tutor Prep Guide | Induced Fit, Inhibition Types, Vmax and Km

IB Biology: Enzymes and Metabolism Tutor Prep Guide | Induced Fit, Inhibition Types, Vmax and Km

  • 2026-11-15

Students can recite that enzymes lower activation energy, yet they answer wrongly when asked whether adding more enzyme keeps raising the rate. Enzyme questions really contain only two pictures: the saturation curve sets the rate ceiling, and the inhibitor comparison explains the change in curve shape. This lesson reduces the chapter to two graphs and one Km number.

Objectives — Students can: (1) explain specificity with induced fit and state that an enzyme lowers activation energy without moving the equilibrium position; (2) distinguish competitive from non-competitive inhibition using both Vmax and Km; (3) read Vmax and Km from experimental data and use the numbers to explain why extra enzyme only helps at high substrate concentration.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Protein structure Which level of structure shapes the active site? Tertiary structure; denaturation destroys shape and function
Collision theory What must molecules satisfy before reacting? Enough kinetic energy to clear the activation energy, plus correct orientation
Graph reading What does a flattening curve mean? That variable is no longer the limiting factor

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-6 min Opening judgement Ask whether doubling enzyme doubles the rate Write an answer, compare at the end
6-18 min Induced fit and activation energy Show the active site adjusting as substrate binds State the source of specificity in one sentence
18-30 min Two inhibition types Plot competitive and non-competitive on one saturation curve Name how Vmax and Km each change
30-44 min Reading Vmax and Km Km 4 mM with Vmax 120, plus three data points Compute the three rates and compare the gains
44-56 min Experiment design A controlled test of temperature on rate Write independent, dependent and two control variables
56-60 min Exit check Collect two questions and mark at once Complete independently

03 Teaching script (read it out)

Scene 1: Induced fit: the site moulds, but only around the right substrate

Remove the rigid lock-and-key picture first: the active site is not a fixed mould. As the substrate approaches, the site adjusts slightly to fit, which is induced fit, so the enzyme stays specific yet the binding step is dynamic. Then define activation energy precisely: the enzyme provides a lower-energy route so more molecules clear the barrier at body temperature, but it does not change the free-energy difference between reactants and products and cannot make an impossible reaction happen. That sentence is where most marks are won or lost. Treat denaturation separately: heat and extreme pH break the non-covalent and ionic bonds holding tertiary structure, the active site loses its shape, and adding more substrate cannot rescue activity. That is a different failure from an inhibitor occupying the site. Give one measurable anchor: raising temperature from 25 to 35 degrees lifts the rate from 1.5 to 2.4, a ratio of 1.6, so anything above 1 means acceleration; at 60 degrees the rate collapses because denaturation is irreversible.

Students do: draw the energy profile with and without the enzyme, mark the lowered activation energy and write one line stating that the equilibrium position is unchanged.

Scene 2: Two inhibition types: one competes for space, one changes the shape

A competitive inhibitor resembles the substrate and occupies the active site, so extra substrate can outcompete it: Vmax is unchanged and Km rises, meaning apparent affinity falls. A non-competitive inhibitor binds away from the active site and distorts the enzyme so the site no longer works; extra substrate does not help: Vmax falls and Km is unchanged. Use one saturation graph for both. The competitive curve still reaches the same plateau, it simply needs a higher substrate concentration to get there; the non-competitive curve flattens at a visibly lower plateau. Teach the two readings once – plateau height is Vmax, substrate concentration at half the plateau is Km – and students can classify any curve themselves. Add the applied line: heavy metal ions are usually non-competitive because they bind sulfhydryl groups and distort the whole molecule, whereas many drug designs are competitive precisely because raising substrate concentration can reverse them.

Students do: pair four curves into before-and-after inhibitor sets, name which pair is competitive and justify it with both readings.

Scene 3: Vmax and Km: the two numbers hidden in a saturation curve

Work one data set end to end: set Vmax at 120 and Km at 4 mM. At a substrate concentration of 4 the rate is 60, exactly half of Vmax, which is the definition of Km; students must compute it rather than memorise it. Second point: at 12 mM the rate is 90, three quarters of Vmax. Third point: at 20 mM the rate is only 100. The successive gains are 60, 30 and 10, shrinking each time, and that shrinking gain is what saturation means: every active site is occupied, so more substrate changes nothing. That answers the opening question directly. At low substrate concentration extra enzyme helps because sites are free; at high substrate concentration substrate is in excess, so extra enzyme is what raises the ceiling, not extra substrate. One sentence handles two different long questions. Close with the Lineweaver-Burk line: the y-intercept gives the reciprocal of Vmax and the x-intercept gives minus the reciprocal of Km, which makes inhibition type visible without estimating points.

Students do: estimate Vmax and Km from three data points, then check the estimate against a double-reciprocal plot so both answers agree.

04 Question types and worked steps

Type Example Steps Answer
Explanation Explain why an enzyme catalyses one reaction only Induced fit, complementary site shape, non-covalent bonding Must mention shape, not just the word specific
Inhibition classification Classify from a pair of curves Check whether the Vmax plateau moved and whether Km moved Both readings are required
Data calculation Find Km or Vmax from rates Half-Vmax concentration, or double-reciprocal intercepts State units and why those points were chosen
Experiment design Design a test of temperature on rate Independent, dependent, control variables, repeats Explain how pH and substrate concentration are held constant
Sanity check (teach this): Sanity check: the whole chapter keeps two anchors only – plateau height is Vmax and half-plateau concentration is Km – and every inhibition question returns to them; the energy profile and the saturation curve are taught separately so students do not confuse lowering activation energy with raising the rate ceiling; every number comes from the same Vmax and Km pair so students can verify by calculation; any answer claiming an enzyme supplies energy is corrected on the spot to lowering the required energy.

05 Independent practice (3 questions)

Question Answer What to watch
Induced fit Explain specificity in three sentences Look for active site shape and non-covalent bonds
Inhibition pairing Match four curves into two sets Check that both Vmax and Km are discussed
Calculation Derive Km from two rate readings Check units and the reason for the chosen points

06 Common mistakes and what to say

Mistake Student writes Say this
Enzyme supplies energy Describing a lowering of activation energy as giving energy If you write that the enzyme supplies energy, mark it wrong: it lowers the barrier, the overall energy change never moves.
More enzyme always faster Claiming doubling enzyme doubles rate at high substrate Ask whether the active sites are already full; if they are, extra enzyme is the only thing that helps.
Swapping the two inhibitions Saying Vmax falls for a competitive inhibitor Competitive means competition for the site, so extra substrate restores the plateau; a lower plateau belongs to non-competitive.
Denaturation called inhibition Treating heat inactivation as an inhibitor An inhibitor binds the enzyme; denaturation destroys its shape, reversible versus irreversible, keep them apart.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Induced fit Complementary shape that adjusts on binding Calling it a fixed lock means replay scene one
Two inhibitions Competitive keeps Vmax, non-competitive lowers Vmax Swapping them means replay scene two
Two readings Plateau is Vmax, half plateau is Km Only mentioning saturation means replay scene three

09 Tutor FAQ

Must students memorise the Km definition?

Yes: Km is the substrate concentration giving half of Vmax, and a smaller Km means higher affinity, which IB tests directly.

Is the double-reciprocal plot required?

SL needs to know it linearises the curve; HL must read Vmax and Km from the intercepts and classify inhibition from it.

Should coenzymes be covered?

Mention NAD and FAD as hydrogen carriers, but keep the focus on active sites and inhibition rather than the electron transport chain.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →