/en-tutor-prep-igcse-chemistry-electrolysis-electrode-products-practice-1/
/en-tutor-prep-igcse-chemistry-electrolysis-electrode-products-practice-1/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

IGCSE Chemistry Electrolysis Paper 1 (Foundation)

IGCSE Chemistry Electrolysis Paper 1 (Foundation)

  • 2026-11-19

IGCSE Chemistry Electrolysis Paper 1 (Foundation)

Ten foundation items from the meaning of electrolysis to the ions each electrode attracts and the products of molten and aqueous electrolytes.

Ten foundation items on the meaning of electrolysis and electrode products The first paper fixes the conditions electrolysis needs, then separates cathode and anode products, and finally corrects two common errors about alternating current and graphite.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: IGCSE Chemistry: Electrolysis and electrode products
Level Foundation

02 Questions (10 items)

  1. FoundationWhat is electrolysis?
  2. FoundationWhy does solid sodium chloride not conduct electricity?
  3. FoundationWhat is obtained at the cathode and the anode when molten lead chloride is electrolysed?
  4. FoundationWhich ions does each electrode attract?
  5. IntermediateWhat charge passes when a current of 2.0 A flows for 30 s?
  6. IntermediateWhat happens at a copper anode when copper electrodes are used in copper sulfate solution?
  7. ChallengeWhat is the main product at the anode when concentrated sodium chloride solution is electrolysed?
  8. ChallengeElectrolysis of dilute sulfuric acid gives 40 cm3 of hydrogen. What volume of oxygen is collected?
  9. Error redoA student says electrolysis must use alternating current. Is this correct?
  10. Error redoAre graphite electrodes used up during electrolysis?

03 Answers and one-line notes

# Answer One-line note
1 The breakdown of a compound by passing a direct current through the electrolyte. It requires a power supply, electrodes and a conducting electrolyte.
2 Its ions are fixed in the lattice and cannot move. Ions move freely only when the salt is molten or dissolved.
3 Lead at the cathode and chlorine at the anode. Lead ions gain electrons at the cathode and chloride ions lose electrons at the anode.
4 The cathode attracts positive ions and the anode attracts negative ions. Opposite charges attract, so ions move to the electrode of opposite sign.
5 60 C. Charge is current multiplied by time, so 2.0 times 30 gives 60.
6 The copper anode dissolves and the blue colour of the solution stays much the same. An active anode is oxidised before water, so no oxygen is released.
7 Chlorine. Concentrated chloride ions discharge in preference to hydroxide ions.
8 20 cm3. The volume ratio of hydrogen to oxygen is 2 to 1.
9 No, electrolysis needs direct current. Alternating current reverses the products in the next half cycle.
10 Normally not, because graphite is an inert electrode. Graphite only conducts; it takes no part in the redox reaction.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →