/en-tutor-prep-igcse-chemistry-electrolysis-electrode-products/
/en-tutor-prep-igcse-chemistry-electrolysis-electrode-products/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

IGCSE Chemistry: Electrolysis and Electrode Products Lesson-Prep Guide (for tutors)

IGCSE Chemistry: Electrolysis and Electrode Products Lesson-Prep Guide (for tutors)

  • 2026-11-16

Students remember that the cathode gives metal and the anode gives gas, yet they cannot say how molten lead bromide and its aqueous solution differ at the anode. They have never separated what the electrolyte is from what the electrodes are made of, and they have never gone from current and time to a mass. This lesson uses 2.0 amps for thirty minutes to link ion movement, discharge order and charge arithmetic into one chain.

Objectives — By the end of the lesson students can: (1) explain electrolysis as electrical energy driving chemical change, with oxidation at the anode and reduction at the cathode, and contrast molten lead bromide with its aqueous solution to show that water decides the products; (2) predict products from the discharge series, giving hydrogen and chlorine from brine and copper and oxygen from copper sulfate solution with inert electrodes; (3) convert charge into moles, so that 2.0 amps for 30 minutes passes 3600 coulombs, that is 0.0373 mol of electrons, depositing 1.18 grams of copper and releasing 448 cubic centimetres each of hydrogen and chlorine.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Ions and conduction Why does salt solution conduct electricity? Freely moving ions; solid salt does not conduct
Redox What is losing electrons called? Oxidation, with reduction as gain, remembered as OIL RIG
Reactivity series Which loses electrons more easily, copper or zinc? Zinc is more reactive, so it is oxidised first

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-6 min Opening question Ask what the anode gives from molten and from aqueous lead chloride, holding the answer Write a prediction to compare with chlorine and oxygen
6-20 min Act 1: ion movement at both electrodes Draw the cell, the ions and the electron path Mark where oxidation and reduction happen
20-34 min Act 2: discharge order Compare molten, brine and copper sulfate systems Predict four sets of products with reasons
34-46 min Act 3: charge to moles Go from 2.0 amps and 30 minutes to 1.18 grams of copper Work out 448 cubic centimetres of gas
46-54 min Practice and correction Set four questions and hunt for answers expecting hydrogen at the anode Work independently and correct errors
54-60 min Exit check Ask three core questions Answer orally, log errors as homework

03 Teaching script (read it out)

Scene 1: Two electrodes, two jobs: oxidation at the anode, reduction at the cathode

Fix the direction first, because most errors start there. The cell pulls electrons from the anode, which is the positive electrode during electrolysis and attracts anions; the cathode supplies electrons and attracts cations. At the anode anions lose electrons (2Br- gives Br2 and two electrons); at the cathode cations gain electrons (Pb2+ and two electrons give Pb). Stress that electrons never cross the solution: ions carry the current there, so the circuit is a relay of ions and electrons. Apply it to molten lead bromide, where no water exists and only lead and bromide ions are present, so the cathode gives lead and the anode gives bromine with no third option. Then ask what changes in aqueous lead bromide: the cathode still gives lead because lead is less reactive than hydrogen, but the anode may give oxygen because hydroxide ions from water lose electrons more readily than bromide ions – that contrast opens the second act.
Students do: label the electron path, the ion migration and which electrode is oxidising and which is reducing.

If a student says electrons cross the solution from anode to cathode, return to the ion relay and make them mark the boundary.

Scene 2: Discharge order: check molten or aqueous first, then see which ion discharges

Learn the order in two lines. At the anode, halide ions such as chloride, bromide and iodide discharge first, then hydroxide ions give oxygen, and oxyanions such as sulfate and nitrate generally do not discharge. At the cathode, metals below hydrogen such as copper, silver and gold are deposited, while reactive metals such as potassium, sodium, calcium, magnesium and aluminium are never produced from aqueous solution, where hydrogen is released instead. Work three systems: molten sodium chloride gives sodium and chlorine; concentrated brine gives hydrogen and chlorine while the remaining hydroxide and sodium ions form sodium hydroxide, which is why the chlor-alkali industry gets three products; copper sulfate with inert electrodes gives copper and oxygen and the blue colour fades. Add the electrode material as a separate variable: copper electrodes in copper sulfate dissolve at the anode (Cu gives Cu2+ and two electrons) while copper is deposited at the cathode, so concentration and colour stay constant, which is electroplating; with platinum or graphite the anode gives oxygen instead.
Students do: predict four sets of products – molten sodium chloride, concentrated brine, copper sulfate with inert electrodes, copper sulfate with copper electrodes – with one reason each.

If a student expects hydrogen at the anode, return to the anion discharge order and force the molten and aqueous cases apart.

Scene 3: Charge to moles: Q equals It, divided by 96500 for electrons, then read the half equation

Three fixed steps. First the charge, Q equals I times t, so 2.0 amps over 1800 seconds gives 3600 coulombs. Second the electron moles, 3600 divided by 96500 gives 0.0373 mol. Third the half equation: Cu2+ plus two electrons gives Cu, so copper is half the electron moles, 0.01865 mol, which times 63.5 gives 1.18 grams; for a gas, 2H+ plus two electrons gives H2, so hydrogen is also 0.01865 mol and 0.01865 times 24000 cubic centimetres per mole gives 448 cubic centimetres, with chlorine at the anode also 448, which is why brine electrolysis gives a one to one gas volume ratio, whereas electrolysing water gives two to one because the oxygen half equation needs four electrons. Two boundaries to hold: the mole ratio of products comes from the electron count in the half equations, and mass and volume both come from moles, so no step may be skipped.
Students do: go from 2.0 amps and 30 minutes to 1.18 grams of copper and 448 cubic centimetres of hydrogen, and say why brine is not two to one.

If a student multiplies charge by 96500, correct it to division and ask for the units on each line.

04 Question types and worked steps

Type Example Steps Answer
Product prediction Molten and aqueous lead bromide Check for water first, then apply the discharge order Molten gives lead and bromine; aqueous gives lead and oxygen
Charge 2.0 amps for 30 minutes Q equals It, then divide by 96500 3600 coulombs, 0.0373 mol of electrons
Mass and volume Copper deposited from the same charge Halve the electron moles for copper and multiply by molar mass 0.01865 mol, 1.18 grams, and 448 cubic centimetres of gas
Electrode material Copper sulfate with copper electrodes A reactive anode dissolves, so concentration holds Anode dissolves, cathode plates, blue colour unchanged
Sanity check (teach this): Four checks. First charge balance: the electron moles gained at the cathode must equal those lost at the anode, so unequal values mean a half equation coefficient is wrong. Second gas ratio: brine is one to one and water is two to one, so a two-to-one answer for brine sends you back to the oxygen half equation. Third mass direction: a reactive anode such as copper loses mass while the cathode gains it, whereas an inert anode only releases gas. Fourth colour and concentration must agree, with copper electrodes keeping copper sulfate blue and inert electrodes fading it as pH falls. Close with the energy loop: electrolysis drives a change that would not happen on its own, storing electrical energy as chemical energy, the reverse of a discharging cell.

05 Independent practice (3 questions)

Question Answer What to watch
2.0 amps for 30 minutes: what charge passes and how many moles of electrons 3600 coulombs, 0.0373 mol Check seconds are used before multiplying
The same charge electrolyses copper sulfate with inert electrodes: what mass of copper 1.18 grams Check halving before multiplying by 63.5
The same charge electrolyses concentrated brine: what volumes of hydrogen and chlorine at room temperature 448 cubic centimetres each Check electron moles are halved and multiplied by 24000
Copper electrodes replace inert ones in copper sulfate: what happens to colour and concentration Unchanged, since dissolution and plating match Check the reactive anode is named

06 Common mistakes and what to say

Mistake Student writes Say this
Expecting hydrogen at the anode Saying every anode gives hydrogen The anode discharges anions: halides first, then hydroxide giving oxygen; hydrogen only appears at the cathode.
Confusing molten with aqueous Saying sodium is produced at the cathode from sodium chloride solution Water supplies hydrogen ions that are easier to reduce than sodium, so sodium needs a molten, water-free electrolyte.
Multiplying charge by 96500 Turning 3600 coulombs into hundreds of millions of moles Electron moles are charge divided by 96500, giving 0.0373 here.
Ignoring electrode material Saying the anode always gives oxygen in copper sulfate A copper anode dissolves instead; only inert electrodes release oxygen.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Electrode reactions Oxidation at the anode, reduction at the cathode, electrons only in the wires Wrong: redraw the direction diagram
Discharge order Halides first at the anode; reactive metals give hydrogen in water Wrong: reorder the four systems
Charge arithmetic Q equals It, divided by 96500 for electrons Wrong: redo 1.18 grams and 448 cubic centimetres

09 Tutor FAQ

Why is the hydrogen volume twice the oxygen volume when water is electrolysed?

A hydrogen ion needs one electron to become an atom and two atoms make one molecule, whereas one oxygen molecule needs four electrons, so the same charge gives twice as many hydrogen molecules.

Why does the blue colour stay when copper electrodes are used in copper sulfate?

The anode dissolves copper ions at the same rate the cathode removes them, so the concentration holds steady, which is the basis of electroplating and refining.

Why must the electrolyte be molten or dissolved?

Ions in a solid lattice cannot move, so there is no conduction; melting or dissolving frees them to migrate and complete the circuit.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →