/en-tutor-prep-igcse-chemistry-metal-extraction-reactivity-practice-1/
/en-tutor-prep-igcse-chemistry-metal-extraction-reactivity-practice-1/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

IGCSE Chemistry Metal Extraction and Reactivity Paper 1 (Foundation)

IGCSE Chemistry Metal Extraction and Reactivity Paper 1 (Foundation)

  • 2026-11-19

IGCSE Chemistry Metal Extraction and Reactivity Paper 1 (Foundation)

Ten foundation items from the order of the reactivity series to choosing electrolysis or carbon reduction, blast furnace raw materials and native metals.

Ten foundation items on the reactivity series and blast furnace materials The first paper fixes the order of the series, uses it to explain why potassium, sodium and aluminium need electrolysis, then sets out the three raw materials of the blast furnace.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: IGCSE Chemistry: Metal extraction and the reactivity series
Level Foundation

02 Questions (10 items)

  1. FoundationWhat is the reactivity series and how are metals ordered in it?
  2. FoundationWhy are potassium, sodium and aluminium extracted by electrolysis while iron and zinc are reduced with carbon?
  3. FoundationWhat are the three main raw materials in an iron blast furnace and what does each do?
  4. FoundationIn what form are the least reactive metals such as gold and platinum usually found in nature, and why?
  5. IntermediateWrite the balanced equation for the reduction of iron(III) oxide by carbon monoxide in the blast furnace.
  6. IntermediateWhy is alumina dissolved in molten cryolite when aluminium is extracted by electrolysis?
  7. ChallengeWhat percentage by mass of iron(III) oxide is iron, and how much iron can 1000 kg of pure ore give in theory?
  8. ChallengeIf the blast furnace yields only 80 percent of the theoretical amount, how much iron comes from 1000 kg of pure ore?
  9. Error redoA student says limestone acts as the reducing agent in the blast furnace. What is wrong?
  10. Error redoA student says every metal oxide can be reduced by carbon. Is that right?

03 Answers and one-line notes

# Answer One-line note
1 A list of metals ordered by how vigorously they react with oxygen, water and dilute acid: potassium, sodium, calcium, magnesium, aluminium, carbon, zinc, iron, tin, lead, hydrogen, copper, silver, gold. The series also tells us which metal can displace another metal from its salt.
2 Oxides of very reactive metals are too stable for carbon to reduce, so electrolysis is needed; iron, zinc and lead sit below carbon and are reduced by coke or carbon monoxide. The position of the metal relative to carbon decides the extraction method.
3 Iron ore supplies the iron oxide; coke burns to give heat and carbon monoxide as the reducing agent; limestone breaks down to calcium oxide and removes silica as slag. Limestone removes impurities; it is not the reducing agent.
4 Usually as the free element, because they are so unreactive that they hardly combine with oxygen or other elements. Low reactivity means the metal is hard to oxidise, so it occurs native.
5 Fe2O3 + 3CO gives 2Fe + 3CO2. One mole of iron(III) oxide needs three moles of carbon monoxide; iron to carbon dioxide is 2 to 3.
6 Pure alumina melts near 2050 C, which is far too hot; in cryolite the working temperature drops to about 950 C, saving a lot of energy. Cryolite lowers the melting point; it does not take part in the electrode reactions.
7 The relative formula mass is 2 times 56 plus 3 times 16, which is 160; iron is 112 over 160, that is 70.0 percent, so 1000 kg of ore gives 700 kg of iron. The percentage comes straight from relative atomic masses; real yields are always lower.
8 The theoretical mass is 700 kg, and 700 times 80 percent gives 560 kg. Percentage yield means multiplying the theoretical mass by that percentage.
9 Limestone decomposes to calcium oxide, which reacts with silica impurities to form slag; the reducing agent is carbon monoxide made from coke. Keep the job of removing impurities separate from the job of reducing.
10 No. Oxides of potassium, sodium, calcium, magnesium and aluminium, which are above carbon, cannot be reduced by carbon and need electrolysis. Carbon reduction works only for metals below carbon in the series.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →