IGCSE Chemistry Metal Extraction and Reactivity Paper 2 (Intermediate)
- 2026-11-19
IGCSE Chemistry Metal Extraction and Reactivity Paper 2 (Intermediate)
Ten intermediate items on hydrogen in the series, displacement, rusting conditions and copper reduction, with zinc oxide and alumina calculations.
Ten intermediate items on displacement, rusting and calculation The second paper applies the series to experiments and numbers: hydrogen release, displacement, the two rusting conditions, then mass of zinc from zinc oxide and oxygen volume from electrolysis.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: IGCSE Chemistry: Metal extraction and the reactivity series |
| Level | Intermediate |
02 Questions (10 items)
- FoundationZinc, iron and lead sit above hydrogen in the series while copper, silver and gold sit below. What does that mean for their reaction with dilute acid?
- FoundationWhat is seen when a zinc strip is placed in copper(II) sulfate solution? Write the equation.
- FoundationWhat conditions are needed for iron to rust? Name one method of rust prevention and how it works.
- FoundationHow can copper be obtained from copper(II) oxide? Write an equation.
- IntermediateWhat mass of zinc can 20.25 g of zinc oxide give on heating with excess carbon?
- IntermediateIn the electrolysis of alumina, 4 mol of aluminium form at the cathode. How many moles and what volume of oxygen leave the anode at room temperature and pressure?
- ChallengeAluminium is more reactive than iron, so why do aluminium window frames resist corrosion better than iron?
- ChallengeThe thermite reaction between aluminium powder and iron(III) oxide welds rails. Write the equation and give one safety point.
- Error redoA student thinks the less reactive metal pushes the more reactive one out of solution. What is wrong?
- Error redoA student explains the electrolysis of aluminium by saying aluminium is very unreactive. What is wrong?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Metals above hydrogen are reactive enough to give hydrogen gas with dilute acid; copper, silver and gold below hydrogen do not react. | Whether hydrogen is released is the practical test for a metal being above or below hydrogen. |
| 2 | Red-brown copper forms on the zinc and the blue colour fades; Zn + CuSO4 gives ZnSO4 + Cu. | Zinc is more reactive than copper, so it displaces copper ions from solution. |
| 3 | Both oxygen and water must be present; paint or a zinc coating keeps them away, and zinc also corrodes first because it is more reactive, protecting the iron. | Both conditions are needed, which is why dry or vacuum storage prevents rusting. |
| 4 | Heat it with carbon: 2CuO + C gives 2Cu + CO2; heating in hydrogen also works: CuO + H2 gives Cu + H2O. | Copper is below carbon, so carbon can reduce its oxide. |
| 5 | The relative formula mass is 65 plus 16, which is 81; moles equal 20.25 over 81, that is 0.25 mol, so the zinc mass is 0.25 times 65, which is 16.25 g. | ZnO + C gives Zn + CO, so zinc and zinc oxide are in a 1 to 1 ratio. |
| 6 | 2Al2O3 gives 4Al + 3O2, so 4 mol of aluminium goes with 3 mol of oxygen; the volume is 3 times 24, which is 72 dm3. | Balance the equation first, then convert with the mole ratio to a gas volume. |
| 7 | Aluminium grows a thin, tough and adherent oxide layer that seals the metal underneath, while rust is flaky and falls away so it cannot protect the iron. | A protective layer only works if it is dense and firmly attached. |
| 8 | 2Al + Fe2O3 gives Al2O3 + 2Fe; the reaction releases so much heat that it must be kept away from flammables and handled with protective gear. | Aluminium is more reactive than iron, so it takes the oxygen away from iron oxide. |
| 9 | The direction is the other way: the more reactive metal displaces the ions of the less reactive one, and copper cannot displace zinc ions. | Remember it as the stronger metal displacing the weaker, never the reverse. |
| 10 | Aluminium is very reactive and sits above carbon, so carbon cannot reduce alumina, which is exactly why electrolysis is needed. | Electrolysis is used because the metal is too reactive, not because it is too unreactive. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



