/en-tutor-prep-igcse-chemistry-separation-purity-chromatography-practice-1/
/en-tutor-prep-igcse-chemistry-separation-purity-chromatography-practice-1/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

IGCSE Chemistry Separation Techniques and Purity Paper 1 (Foundation)

IGCSE Chemistry Separation Techniques and Purity Paper 1 (Foundation)

  • 2026-11-19

IGCSE Chemistry Separation Techniques and Purity Paper 1 (Foundation)

Ten foundation items that start from mixtures versus compounds, then set out what filtration, crystallisation, distillation, a separating funnel and chromatography can and cannot do.

Ten foundation items on five separation methods The first paper builds the matching between method and target: filtration for insoluble solids, crystallisation for soluble solids, distillation for different boiling points, a separating funnel for immiscible liquids and chromatography for colours.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: IGCSE Chemistry: Separation techniques and purity
Level Foundation

02 Questions (10 items)

  1. FoundationHow does a mixture differ from a compound?
  2. FoundationWhat does filtration separate, and what is the solid left on the paper called?
  3. FoundationHow is salt recovered from salt solution, and what is the method called?
  4. FoundationWhat does simple distillation separate, and why is a condenser needed?
  5. IntermediateWhich apparatus separates oil and water, and why does it work?
  6. IntermediateWhat is the basic principle of chromatography?
  7. ChallengeHow can you tell whether a substance is pure?
  8. ChallengeGive two everyday uses of chromatography.
  9. Error redoHow is the Rf value defined, and does it have units?
  10. Error redoWhy must the start line sit above the level of the solvent?

03 Answers and one-line notes

# Answer One-line note
1 A mixture contains two or more substances in any proportion and can be separated by physical means; a compound has elements chemically combined in a fixed composition and needs a chemical reaction to break it down. Whether physical methods can separate it is the quickest test for a mixture.
2 An insoluble solid from a liquid; the solid left behind is the residue and the liquid that passes through is the filtrate. Filtration only removes insoluble solids; dissolved salt passes through with the filtrate.
3 Heat the solution in an evaporating basin until the water leaves and salt crystals remain; the method is crystallisation. Use crystallisation to keep the salt and distillation to keep the water.
4 Liquids with widely different boiling points, for example pure water from seawater; the condenser cools the vapour back to a liquid and collects it as the distillate. Distillation gives both the distillate and a more concentrated solution left behind.
5 A separating funnel, because oil and water are immiscible and form two layers that can be run off separately through the tap. A separating funnel works by density and layers, not by boiling point.
6 A sample is spotted on paper and solvent creeps up the paper; each component is distributed differently between the solvent and the paper, so they travel at different speeds and separate into spots. The faster a component moves, the more soluble it is in the moving solvent.
7 A pure substance melts and boils at a fixed, narrow temperature; impurities lower the melting point and raise the boiling point, widening the range. Measuring the melting or boiling range is the most direct purity test.
8 Checking food colourings, analysing ink, detecting forged documents or identifying drugs; it is also used to separate and identify components of a mixture. If a locating agent can make the spots visible, chromatography can identify them.
9 Rf = distance moved by the spot from the start line divided by distance moved by the solvent front from the same line; it has no units and lies between 0 and 1. Both distances use the same unit, so the units cancel and Rf is dimensionless.
10 Otherwise the sample simply dissolves into the bulk solvent and never travels up the paper, leaving one blurred smear. Draw the start line in pencil, because pencil does not dissolve in the solvent.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →