Junior Science | Measurement, Units and Precision Prep Guide (Tutor Edition) | Readings, Errors and Density
- 2026-11-18
Students write 27.3 cubic centimetres when the cylinder is marked every cubic centimetre, divide the error by their own reading instead of the accepted value, and count 0.00450 as two significant figures. This lesson reduces measurement questions to three checkable moves: read to half a division, divide the error by the accepted value, then round to the correct number of significant figures.
01 Prerequisites (3-minute check)
If any of these fails, fix it before the lesson starts.
| Skill | Quick check | Pass mark |
|---|---|---|
| Unit conversion | How many centimetres and millimetres are in one metre | One hundred centimetres and one thousand millimetres |
| Decimal division | What is twenty-seven divided by ten | Two point seven |
| Averages | Mean of 2.4, 2.5 and 2.4 | Two point four three |
02 Lesson flow (60 minutes)
| Time | Stage | Tutor does | Student does |
|---|---|---|---|
| 0-6 min | Opening judgement | Ask whether a reading can go to two decimal places when the division is one cubic centimetre | Write the answer first, compare at the end |
| 6-18 min | Readings and half a division | Read four instruments, write the half-division rule on the board | Four readings with units circled |
| 18-30 min | Error and averages | Mean of three readings, then divide the gap by the accepted value | Compute the error for their own set |
| 30-42 min | Significant figures | Rounding products and sums, handling leading zeros | Round six numbers correctly |
| 42-54 min | Density | Mass divided by volume, checked against aluminium at 2.7 | Find the density and name the material |
| 54-60 min | Exit check | Collect two items, mark whether the slip was reading, denominator or rounding | Independent work |
03 Teaching script (read it out)
Scene 1: A reading stops at half the smallest division
Students do: label four instrument photos with the smallest division, the readable fraction and one legal reading with its unit.
Scene 2: The accepted value is the denominator
Students do: recompute their own percentage error and add one sentence on whether a repeat is worth it, with the threshold set at five per cent.
Scene 3: Significant figures measure precision, not size
Students do: mark six numbers, round two products, then divide twenty-seven grams by ten cubic centimetres to get 2.7 grams per cubic centimetre and say why that value is believable for aluminium.
04 Question types and worked steps
| Type | Example | Steps | Answer |
|---|---|---|---|
| Reading and precision | A cylinder filled near 27 cubic centimetres, marked every cubic centimetre | Write the division, then the readable half, then the reading with unit | 27.0 or 27.5 cubic centimetres |
| Percentage error | Readings 2.4, 2.5, 2.4 against an accepted 2.50 | Mean, absolute gap, divide by accepted value, times one hundred | Mean 2.43, error 2.8 per cent |
| Rounding | 1.20 metres times 0.50 metres | Count significant figures, multiply, then round to the fewest | 0.60 square metres at two figures |
| Density and material | Mass 27 grams, volume 10 cubic centimetres | Mass divided by volume, then compare with a table | 2.7 grams per cubic centimetre, aluminium |
05 Independent practice (3 questions)
| Question | Answer | What to watch |
|---|---|---|
| Readings | Measure a pencil with a millimetre ruler and give three legal readings | Units present, decimals stop at half a division |
| Error | A group finds 2.6 grams per cubic centimetre against an accepted 2.7 | Denominator 2.7, answer about 3.7 per cent |
| Significant figures | How many significant figures in 0.03050 metres | Four; leading zeros do not count, the final zero does |
06 Common mistakes and what to say
| Mistake | Student writes | Say this |
|---|---|---|
| Reading beyond the instrument | Writing 27.3 cubic centimetres | The cylinder is marked every cubic centimetre, so only 27.0 or 27.5 is honest. |
| Dividing by the measured value | Gap 0.07 over 2.43 | The denominator is the accepted 2.50, which gives 2.8 per cent, not 2.9. |
| Counting decimal places as significant figures | Calling 0.00450 two figures | Leading zeros do not count, but four, five and zero do, so there are three. |
| Wrong density unit | Writing 2.7 grams per cubic millimetre | Volume in cubic centimetres gives grams per cubic centimetre, which is 2700 kilograms per cubic metre. |
07 Homework (paper, section and question numbers)
- Junior Science chapter index — All chapters for this subject
- Prep guide master index — Matching chapters in other subjects
- Redo this chapter — Practice items 1, 2 and 3: readings, error, significant figures and density
08 Exit check (last 5 minutes)
| Question | Answer | Decision |
|---|---|---|
| Reading precision | Half of the smallest division | Two decimal places means act one again |
| Error denominator | The accepted value | Using the reading means one recomputation |
| Significant figures | Leading zeros do not count | Wrong count means two more items |
09 Tutor FAQ
What if students have never met significant figures
Skip the formal rules and give three sentences: leading zeros do not count, trapped zeros do, trailing zeros after a decimal point do; then count five numbers aloud together and move on.
Must every measurement be repeated three times
Only when the question asks for a mean, otherwise once is enough; the point is that averaging reduces random error rather than being a ritual step.
What if the density matches no material
Check units first, then whether the volume was misread in the displacement method, and only then mention a mixture; students should not assume the answer must match a textbook value.
Find a tutor — freeTutor Registration →
A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.



