S2 Geography Energy resources Paper 3: decarbonisation pathways and cost
- 2026-11-18
S2 Geography Energy resources Paper 3: decarbonisation pathways and cost
Ten challenge items computing energy density, staged emission targets, wind emission savings, solar cost per kWh and storage losses, each with a one-line note.
Targets, cost and storage losses Fuels are compared by energy density, targets are projected year by year, and round-trip efficiency plus carbon intensity test what renewables really deliver.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S2 Geography: Energy resources and the renewable mix |
| Level | Challenge |
02 Questions (10 items)
- FoundationCoal holds 24 MJ per kg and gas holds 50 MJ per kg. How many times more energy does gas carry?
- FoundationA region emitted 10 million tonnes in 2020, cuts 40 per cent by 2030 and a further 50 per cent by 2050. What is the 2050 figure?
- FoundationA wind farm generates 262.8 GWh a year and displaces coal at 0.9 kg of CO2 per kWh. How many tonnes are avoided?
- FoundationA solar plant costs 12 million dollars and delivers 48 million kWh over 20 years. What is the cost per kWh?
- IntermediateAn electric car uses 15 kWh per 100 km while a petrol car uses 8 litres, with 1 litre equal to about 9.1 kWh. How many times more energy does the petrol car use?
- IntermediateDaytime solar surplus is 200 MWh, night demand is 150 MWh and round-trip efficiency is 80 per cent. How much must be stored?
- ChallengeGrid carbon intensity is 0.6 kg of CO2 per kWh and annual supply is 5 000 GWh. What are annual emissions?
- ChallengeA turbine rotor has a radius of 40 m. What is the swept area with pi taken as 3.1416?
- Error redoDoes a low capacity factor mean the turbine itself is inefficient?
- Error redoIf a city runs on 100 per cent renewables, does it need no storage or backup at all?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | About 2.08 times. | 50 divided by 24 is 2.083, and a higher energy density means more heat from the same mass. |
| 2 | 3 million tonnes. | 10 million times 0.6 is 6 million, and 6 million times 0.5 is 3 million, applied stage by stage. |
| 3 | About 236 520 tonnes. | 262.8 million kWh times 0.9 kg is 236.52 million kg, which is 236 520 tonnes. |
| 4 | $0.25. | 12 million divided by 48 million is 0.25, since cost is spread over lifetime output. |
| 5 | About 4.85 times. | 8 times 9.1 is 72.8 kWh, and 72.8 divided by 15 is 4.85. |
| 6 | 187.5 MWh. | 150 divided by 0.8 is 187.5, because losses mean more must be stored than is finally used. |
| 7 | 3 million tonnes. | Five billion kWh times 0.6 kg is 3 billion kg, which is 3 000 000 tonnes. |
| 8 | About 5 026.6 square metres. | Pi times 40 squared is 5 026.6, and the swept area sets how much wind energy can be captured. |
| 9 | No. | Capacity factor reflects the wind resource at the site, which is separate from the machine energy conversion efficiency. |
| 10 | No. | Solar and wind are both intermittent, so storage, interconnectors or reserve capacity are still required for stability. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



