Industrial system and location: ten basic items
- 2026-11-18
Industrial system and location: ten basic items
Start from inputs, processes and outputs, separate heavy from light industry, then drill location factors with plain figures.
Why are factories built near raw materials or markets? Because moving materials and products costs money, and the heavier or more perishable the goods, the bigger that share becomes.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S2 Geography: Industrial system and industrial location |
| Level | Basic |
02 Questions (10 items)
- FoundationWhat are the three parts of an industrial system?
- FoundationA garment factory uses 12,000 m of cloth a month, with 2.5 m per item. How many items can it make at most?
- FoundationEach item costs $18 in material, $7 in labour and $5 in other costs, and sells at $42. What is the profit per item?
- FoundationWith $12 profit on $30 of cost, what is the profit rate on cost?
- IntermediateWhich type of industry needs much labour but little machinery investment?
- IntermediateBakeries are usually sited near built-up areas. Which location factor is mainly at work?
- ChallengeAluminium smelting uses huge amounts of electricity. Where is the plant most likely to be?
- ChallengeA steel mill is sited close to both iron ore and coal. Which location factor is this?
- Error redoA plant covers 500 square metres and turns out 6 items per square metre each day. What is the daily output?
- Error redoWhich of the following is an output rather than an input?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Inputs, processes and outputs. | Inputs cover raw materials, energy, labour, capital and land; outputs cover products and waste. |
| 2 | 4,800 items. | 12,000 divided by 2.5 equals 4,800, so material supply sets the output ceiling. |
| 3 | $12. | Total cost is 18 plus 7 plus 5, which is $30, and 42 minus 30 leaves $12, forty per cent of cost. |
| 4 | 40%. | 12 divided by 30 times 100 equals 40%, and the denominator is cost, not price. |
| 5 | Labour-intensive industry, such as garment making and assembly. | Capital-intensive industry invests heavily in machinery and employs fewer workers, for example oil refining and car making. |
| 6 | A market location. | Bread spoils quickly and is bulky but low in value, so transport is costly and the plant sits near consumers. |
| 7 | Near a cheap and steady power supply, such as a hydroelectric station. | Power is the main cost in smelting aluminium, which makes it an energy location factor. |
| 8 | A raw material location. | Steel making consumes bulky materials, and moving materials costs more than moving the product, so the mill sits at the source. |
| 9 | 3,000 items. | 500 times 6 equals 3,000, so floor space caps capacity directly. |
| 10 | The finished product. | Materials, power and labour are inputs; only products and waste are outputs. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



