Industrial system and location: ten advanced items
- 2026-11-18
Industrial system and location: ten advanced items
Compare sites with cost shares, the material index and freight, and weigh labour-intensive against capital-intensive production.
What is the material index? The material index is input weight divided by product weight; above 1 weight is lost and the plant moves toward materials, below 1 it gains weight and moves toward the market.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S2 Geography: Industrial system and industrial location |
| Level | Intermediate |
02 Questions (10 items)
- FoundationHourly wages are $60 at site A and $36 at site B. How much lower is labour cost at B?
- FoundationLabour is 30% of total cost and wages fall by 20%. By how much does total cost fall?
- FoundationSmelting one tonne of steel takes 4 tonnes of iron ore and 1.5 tonnes of coal. What is the material index?
- FoundationA bottling plant turns a tonne of water into about a tonne of drink, bulky and of modest value. Where should it be?
- IntermediateMaterials travel 60 km at $2.5 per tonne-kilometre. What is the freight per tonne?
- IntermediateMany similar plants gather in one estate and share waste treatment and suppliers. What is this advantage called?
- ChallengeGovernment builds an industrial estate in the suburbs with tax concessions. Which location factor is this?
- ChallengeIndustrial land costs $1,200 per square metre in the city and $300 in the suburbs. How many times dearer is the city?
- Error redoA factory discharges untreated waste water. Who really bears the treatment cost?
- Error redoWhy did many Hong Kong textile plants move to the Pearl River Delta in the 1980s?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 40%. | 60 minus 36, divided by 60 and times 100, gives 40%, using site A as the base. |
| 2 | 6.0%. | 30% times 20% equals 6.0%, since only that share of cost is affected. |
| 3 | 5.5. | 4 plus 1.5 divided by 1 gives 5.5, above 1, so weight is lost and the mill drifts toward materials. |
| 4 | Near the market. | Weight and volume are not reduced and value is low, so shipping the product is uneconomic, which makes it a market location. |
| 5 | $150. | 60 times 2.5 equals $150, and freight rises with both distance and weight. |
| 6 | Agglomeration economies. | Agglomeration, an external economy of scale, lowers the cost of each plant and differs from one plant growing bigger. |
| 7 | Government policy. | Policy changes siting through land, tax, infrastructure and environmental rules. |
| 8 | Three times dearer, that is 300% higher. | 1,200 divided by 300 equals 4, so the city is four times as dear, which is three times dearer. |
| 9 | Society does, as an external cost. | The firm saves the treatment charge while residents and government bear the pollution, which is why discharge rules and effluent fees exist. |
| 10 | Labour and land there were cheaper, with factories and materials close by. | Labour-intensive stages followed low-cost sites, while management, design and trading stayed in Hong Kong. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



