/en-tutor-prep-s2-maths-similar-triangles-scale-drawing/
/en-tutor-prep-s2-maths-similar-triangles-scale-drawing/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Secondary Maths | Similar Triangles and Scale Drawings Prep Guide (for tutors) | Tests, area ratio, scale

Secondary Maths | Similar Triangles and Scale Drawings Prep Guide (for tutors) | Tests, area ratio, scale

  • 2026-11-19

Students write that similar figures are the same shape, then pair the corresponding sides in the wrong order; in an area question they multiply by the scale factor once and forget to square it; and with a scale drawing they never know whether to multiply or divide. This lesson ties the scale factor, the squared area ratio and the cubed volume ratio to one number, and every step must name that number first.

Objectives — Students will be able to: (1) test two triangles for similarity with AA, three sides in proportion, or two sides in proportion with an equal included angle, and write the ratio in corresponding order; (2) find an unknown side or a perimeter from the scale factor and explain why the perimeter ratio equals the scale factor; (3) convert with the area ratio equal to the square of the scale factor and the volume ratio equal to its cube, and explain why; (4) convert lengths and areas from a scale drawing and give the correct unit.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Simplifying ratios Simplify the ratio 6 to 9 2 to 3
Angle sum of a triangle What do the three angles of a triangle add up to 180 degrees
Squares and cubes What are 3 squared and 3 cubed 9 and 27

02 Lesson flow (45 minutes)

Time Stage Tutor does Student does
0-6 min Diagnostic opener Ask whether two triangles of the same shape must have the same side lengths Write an answer, then compare with the definition of a scale factor
6-16 min Three similarity tests Show AA, three sides in proportion and two sides with equal included angle Decide on given data and name the test
16-26 min Corresponding sides and perimeter Use 6, 9, 12 against 10, 15, 20 to find the scale factor Calculate the factor, an unknown side and the perimeter ratio
26-35 min Area and volume ratios From a factor of 5 to 3, get area 25 to 9 and volume 125 to 27 Calculate the multipliers and explain why
35-43 min Scale drawings On a 1 to 500 drawing, 4 cm represents 20 m Convert a length and an area with units
43-45 min Exit check Mark two items on the spot, label ratio or squaring errors Work independently

03 Teaching script (read it out)

Scene 1: Similar is not nearly the same: name one of the three tests

Similar figures have the same shape but may differ in size, so corresponding angles are equal and corresponding sides share one ratio. A square 6 m by 6 m and a square 3 m by 3 m are similar with a factor of 2, and two rectangles can be similar even when one is long and thin, provided both side pairs share the same ratio.Show the counter-example: sides 3, 4, 5 against 6, 7, 8 fail because 6 over 3 is 2, 7 over 4 is 1.75 and 8 over 5 is 1.6, and similarity needs one common ratio. In right angles the pupils often compare the wrong pair, so insist on writing each pair in the same direction.
Students do: decide whether 3, 4, 5 and 6, 8, 10 are similar and state the factor of 2.
Students say: why every pair must share the same ratio.

Students restate: same shape, equal angles, all pairs in one ratio.

Scene 2: Corresponding sides and perimeter: one factor for every length

The scale factor compares one side with its corresponding side: 6 to 3 is 2, 10 to 5 is 2, 16 to 8 is 2, so the factor is 2 and the drawing is enlarged by 2. Once the factor is known, every corresponding length is multiplied by it, including heights and diagonals, because the shapes are identical apart from size.Perimeter is a sum of lengths, so every term is multiplied by the factor and the whole perimeter is multiplied too: a perimeter of 14 cm becomes 28 cm with a factor of 2, and 42 cm with a factor of 3. The class must see that perimeter is length, not area, so it is never squared.
Students do: find an unknown side with a factor of 2 and the perimeter with a factor of 3.
Students say: why a diagonal is multiplied by the factor as well.

Students restate: every length, including perimeter, is multiplied by the factor.

Scene 3: Area squares the factor, volume cubes it, and a scale drawing is another factor

Area is length times length, so both lengths are enlarged by the factor and the area is enlarged by its square: a factor of 2 gives an area four times as large, a factor of 3 gives nine times, and a factor of 0.5 gives a quarter. Volume is length times length times length, so it is enlarged by the cube: 8 times for a factor of 2, 27 times for 3.A scale drawing is the same idea with a stated factor. On a 1 to 500 plan, 1 cm represents 500 cm, so a 4 cm by 3 cm rectangle becomes 20 m by 15 m with an area of 300 square metres. Check the area route: the drawing area is 12 square centimetres, the area factor is 500 squared, which is 250,000, and 12 times 250,000 gives 3,000,000 square centimetres, or 300 square metres, matching the first route.
Students do: convert 6 square centimetres on a 1 to 200 drawing into 24 square metres.
Students say: why the area factor is the square of the drawing scale.

Students restate: length times the factor, area times its square, volume times its cube.

04 Question types and worked steps

Type Example Steps Answer
Test for similarity Sides 6, 9, 12 against 10, 15, 20 Write each pair in the same direction All pairs are 5 over 3, similar by three sides
Find an unknown side Corresponding sides 6 to 10, another 9 to x Cross multiply 6 over 10 equals 9 over x 15 centimetres
Area conversion Factor 5 to 3, small area 18 square centimetres Area ratio 25 to 9, multiply by 25 and divide by 9 50 square centimetres
Scale drawing 1 to 500, a 4 cm by 3 cm rectangle on the plan Convert to 20 m by 15 m first 300 square metres
Sanity check (teach this): Sanity checks: a scale factor must be positive, so zero or a negative value means the ratio is upside down; all three side pairs must match, and one different pair means no similarity; when the factor exceeds 1 the area ratio must exceed the factor, so an area only 1.67 times as large means the squaring was dropped; the volume ratio must exceed the area ratio, 8 times against 4 times for a factor of 2; with a first term of 1 in the scale, the real length must be longer than the drawing, so 4 cm becoming 4 m means the factor was missed; units must match, and mixing centimetres with metres is out by 100; the final unit must be square metres or square centimetres as the question asks.

05 Independent practice (3 questions)

Question Answer What to watch
Test for similarity Sides 3, 4, 5 against 6, 8, 10 Compare every pair Similar with a factor of 2
Find a perimeter Factor 3, small perimeter 14 cm Perimeter ratio equals the factor 42 centimetres
Area conversion Factor 1 to 4, small area 9 square centimetres Area ratio 1 to 16 144 square centimetres
Scale drawing 1 to 20,000, 2.5 cm on the plan 2.5 times 20,000 is 50,000 cm 500 metres

06 Common mistakes and what to say

Mistake Student writes Say this
Multiplying an area by the factor once Writing that the area becomes 1.67 times as large Area is two lengths, so the multiplier is the square: about 2.78, turning 18 square centimetres into 50.
Writing the ratio upside down Writing 6 to 10 equals 15 to 9 Pairs must run the same way: 6 to 10 and 9 to 15, then cross multiplication works.
Dividing by the scale instead of multiplying Writing that 4 cm on the plan is 0.008 m in reality On a 1 to 500 plan, 4 cm becomes 2000 cm, which is 20 m.
Checking only two side pairs Writing that 10 over 6 and 15 over 9 are equal, so the triangles are similar All three pairs must agree: 20 over 12 must also match, otherwise 6, 7, 8 slips through.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Similarity test Name one of the three tests with ratios written A missing condition means repeating act one
Area ratio 1 to 16, answer 144 square centimetres Only multiplying once means three more items
Scale drawing 500 metres with the unit Dividing instead means redoing the conversion

09 Tutor FAQ

Why is the area ratio the square of the factor

Area is length times breadth and both are enlarged by the factor, so the factor is used twice; volume uses three lengths, so it is the cube.

What is the difference between similar and congruent

Congruent figures are the special case with a factor of 1, so all sides are equal; similar figures only need the same shape.

What does a scale of 1 to 500 mean

One unit on the drawing stands for 500 units in reality, so multiply a drawing length by 500, and divide a real length by 500 to get back to the drawing.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →