Paper 1: current, voltage and resistance basics
Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: Electric circuits: current, voltage and resistance |
| Level | Basic |
| # | Answer | One-line note |
|---|---|---|
| 1 | Ampere (A) | Current is measured in amperes, symbol A, and an ammeter goes in series. |
| 2 | Volt (V) | Voltage, or potential difference, is energy per unit charge and is measured in volts. |
| 3 | Ohm | Resistance measures how strongly a component opposes current and is measured in ohms. |
| 4 | 3 A | I = Q / t = 30 / 10 = 3 A. |
| 5 | 12 V | V = IR = 2 x 6 = 12 V. |
| 6 | 3 A | I = V / R = 12 / 4 = 3 A. |
| 7 | 12 ohm | R = V / I = 6 / 0.5 = 12 ohm. |
| 8 | 10 ohm | In series resistances simply add: 4 + 6 = 10 ohm, and the current is the same everywhere. |
| 9 | 2 ohm | 1/R = 1/6 + 1/3 = 1/2, so R = 2 ohm, smaller than either branch. |
| 10 | In series | An ammeter goes in series with the branch being measured; a voltmeter goes in parallel. |
Mark your answers on the spot and redo the missed items two days later.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

