Paper 3: tension, pulley systems and energy
Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: Forces, motion and simple machines |
| Level | Challenge |
| # | Answer | One-line note |
|---|---|---|
| 1 | 2.5 m/s2 | a = F / m = 10 / 4 = 2.5 m/s2. |
| 2 | 36 N | T – mg = ma, so T = 3 x (10 + 2) = 36 N, more than the 30 N needed at rest. |
| 3 | 200 N | Load arm 0.3 m and effort arm 0.9 m give F = 600 x 0.3 / 0.9 = 200 N. |
| 4 | 200 N | Each movable pulley halves the effort, so two of them divide by 4: 800 / 4 = 200 N. |
| 5 | 50 W | Work = 200 x 5 = 1000 J, so power = 1000 / 20 = 50 W. |
| 6 | 4.8 m/s | Times are 30 s and 20 s, total 50 s for 240 m, so 240 / 50 = 4.8 m/s, not 5. |
| 7 | 240 J | Work = 30 x 8 = 240 J; friction does negative work and turns kinetic energy into heat. |
| 8 | 36 J | KE = 0.5 x m x v2 = 0.5 x 2 x 36 = 36 J. |
| 9 | 120 J | PE = mgh = 3 x 10 x 4 = 120 J. |
| 10 | 10 N | 15 x 0.4 = F x 0.6, so F = 6 / 0.6 = 10 N. |
Mark your answers on the spot and redo the missed items two days later; always write the formula and the unit.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

