/en-tutor-prep-s2-science-light-colour-dispersion-filters/
/en-tutor-prep-s2-science-light-colour-dispersion-filters/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Junior Science | Light and Colour Prep Guide (for tutors) | Dispersion, primaries and filters

Junior Science | Light and Colour Prep Guide (for tutors) | Dispersion, primaries and filters

  • 2026-11-18

Students can list the colours of the rainbow, but ask what happens to red light through a green filter and the answer comes back green. This chapter turns colour into three quantities that can be calculated: frequency, reflectance and scattering strength.

Objectives — By the end students can: (1) calculate frequency from wavelength and light speed and state that violet is 1.75 times the frequency of red; (2) explain that white light is a mixture and that a prism separates it because refractive index varies with wavelength, and order the spectrum; (3) distinguish additive mixing of light from subtractive mixing of pigments and give the three pairwise results for each; (4) use reflectance to explain the colour of objects and filters, and use the fourth-power scattering rule to explain a blue sky.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Wave equation Speed equals frequency times wavelength Any two give the third
Refraction Which way does light bend entering glass Towards the normal, at a smaller angle
Fractions What is one third of 600 lux 200 lux

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-6 minutes Open with the filter question Ask what red light through a green filter looks like Write the answer, revisit at the end
6-18 minutes Prism and dispersion Split white light and order the colours Draw the ray path and the order
18-32 minutes Frequency from wavelength Calculate red and violet Compare 4.29 and 7.5
32-44 minutes Adding and subtracting RGB against CMY Write three results for each
44-54 minutes Filters and scattering Reflectance, transmission, blue sky Calculate 600 lux through a red filter
54-60 minutes Exit check Two written questions Work independently

03 Teaching script (read it out)

Scene 1: White is a mixture, not an absence

Begin with a prism. Different wavelengths have different refractive indices in glass, so violet bends the most and red the least, and white light fans out into seven colours in the order red, orange, yellow, green, blue, indigo, violet.
Two points to fix immediately. White light already contains all the colours and a prism only separates them, it does not add anything. And a second, inverted prism puts them back together into white, which proves the light was a mixture rather than proving anything about colour names.
Flag the near neighbour that always gets confused: the colours on a soap bubble come from thin-film interference, not dispersion. Only rainbows get the dispersion-plus-droplets answer.Students do: sketch the ray through a prism and mark which colour bends most.
Students say: why a second prism turns the spectrum back into white.

Scene 2: Frequency sets colour, wavelength shifts

Now the numbers. Light travels at 3 x 10^8 m per second. Red at 700 nm gives 4.29 x 10^14 Hz, violet at 400 nm gives 7.5 x 10^14 Hz, so violet is 1.75 times the frequency of red.
Students should hold one sentence: frequency decides colour, frequency does not change when light crosses a boundary, wavelength and speed change together. That explains why red looks dimmer underwater and why the wavelength inside glass is shorter than in air.
The calculation is three steps: write the wave equation, convert nanometres to metres, divide. The usual error is dropping the factor of 10^-9, which makes the answer a thousand times too large.Students do: work out the frequency of green light at 550 nm.
Students say: which of frequency, wavelength and speed stays fixed on entering water.

Scene 3: Two mixing systems that must not be merged

Third scene, mixing. Light adds: red plus green is yellow, red plus blue is magenta, green plus blue is cyan, all three equally is white. Pigments subtract: cyan plus magenta is blue, cyan plus yellow is green, magenta plus yellow is red, all three is black.
One image fixes it. Lights behave like three lamps stacked on the same spot and get brighter as you add; pigments behave like three filters stacked and get darker. The names overlap and the results do not, which is the commonest confusion in the topic.
Then split the technology: a screen uses tiny red, green and blue dots that blend with distance, while printing uses cyan, magenta, yellow and black that absorb. Ask what a phone screen looks like under a magnifier and the answer is three coloured dots.Students do: write three results for light and three for pigment.
Students say: why three lights give white but three paints give black.

Scene 4: Reflectance, filters and a blue sky

Fourth scene, numbers. White paper reflects about 90 per cent of the light falling on it, black cloth about 5 per cent, a factor of 18, which is why pale clothes are cooler in summer.
A filter transmits only its own band. White light at 600 lux through a red filter leaves roughly 200 lux, the rest absorbed. Red light through a green filter has no shared wavelength at all, so nothing gets through and the result is black. This question appears in almost every paper and the answer green scores zero.
Finish with the sky. Air molecules scatter short wavelengths far more strongly, with intensity falling as the fourth power of wavelength, so 450 nm scatters about 5.9 times as much as 700 nm. That gives a blue daytime sky and a red sunset, when light travels through much more atmosphere and the blue has been scattered away. Add the energy comparison: plants absorb 400 to 700 nm and convert around 2 per cent of 1 000 W per square metre, about 20 W, while a solar panel manages roughly 20 per cent, about 200 W.Students do: predict white light through a yellow filter, then red light through the same filter.
Students say: why sunset is red while noon is blue.

04 Question types and worked steps

Type Example Steps Answer
Wavelength to frequency Red light at 700 nm Speed divided by wavelength, nanometres converted first 4.29 x 10^14 Hz
Ordering a spectrum White light through a prism Rank by how much each colour bends Red bends least, violet most
Mixing Red plus green light, cyan plus yellow paint Decide first whether light or pigment Yellow light, green paint
Filter and reflectance 600 lux of white light through a red filter Transmit only the shared band, absorb the rest About 200 lux, appearing red
Sanity check (teach this): Sanity checks: frequencies in this topic sit around 10^14 Hz, and 10^17 means the nanometre conversion was skipped; red must be lower in frequency than violet, and a reversed statement means the wavelength relation is inverted; the spectrum must run from least to most bending, red to violet; any additive result must be brighter than its parts and any subtractive result darker, otherwise the two systems have been merged; transmittance cannot exceed one, so 250 lux out of 600 is an absorption turned into a gain; the scattering ratio must exceed one for blue over red, and a value below one is upside down.

05 Independent practice (3 questions)

Question Answer What to watch
Frequency Green light at 550 nm Check about 5.45 x 10^14 Hz
Filter Red light through a yellow filter Check black, no shared band
Scattering 450 nm against 700 nm Check about 5.9 times more

06 Common mistakes and what to say

Mistake Student writes Say this
Filters are said to tint light Red light through a green filter becomes green A filter absorbs rather than tints, and with no shared wavelength the result is black.
Primaries given as red, yellow, blue Light primaries listed as red, yellow and blue Light uses red, green and blue; pigments use cyan, magenta and yellow.
Nanometres dropped 700 nm treated as 700 m, giving 4.3 x 10^5 Hz One nanometre is 10^-9 m, so the frequency lands near 10^14 Hz.
Colour and brightness conflated White light stays white but dimmer through a red filter Only red emerges, so both the colour and the brightness change.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Frequency and wavelength Frequency fixes colour and survives a boundary Saying wavelength fixes colour means scene two repeats
The two mixing systems Light adds brighter, pigment subtracts darker Merging them means three results to rewrite
Filters Only the shared band passes Answering it changes colour means two more questions

09 Tutor FAQ

What if fourth powers are unfamiliar

Do not expand them. Say halving the wavelength makes scattering sixteen times stronger, square twice on the calculator.

Must the seven colours be memorised

They should be given in order, but the marks sit on which bends most and which has the higher frequency.

How does this differ from the physics course

Junior science stays with observation and simple ratios; physics adds Snell law, critical angle and lens imaging with far stricter algebra.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →