/en-tutor-prep-s2-science-pressure-buoyancy/
/en-tutor-prep-s2-science-pressure-buoyancy/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

S2 Science | Pressure and Buoyancy Tutor Prep Guide | Pressure, liquid depth, upthrust, hydraulics

S2 Science | Pressure and Buoyancy Tutor Prep Guide | Pressure, liquid depth, upthrust, hydraulics

  • 2026-11-19

Students use pressure and force as if they were the same word, assume heavy things always sink and light things always float, and think upthrust grows with depth. This lesson separates the three formulas, gives each one a number to compute, and closes on density ratios.

Objectives — By the end the student can: (1) state that pressure is force divided by area and compute 600 N over 0.02 square metres as 30 000 Pa; (2) state that liquid pressure depends only on depth and density, computing 30 kPa at 3 m and 300 kPa at 30 m; (3) state that upthrust equals the weight of fluid displaced and find it from a spring balance reading difference; (4) use density ratios to predict floating and sinking, including ice at 91.7 per cent submerged and iron at 57.4 per cent in mercury; (5) explain a hydraulic press through equal pressure and compute 100 N in giving 10 000 N out.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Weight and mass How weight comes from mass Weight = mass x 10 (newtons)
Density How density is calculated Density = mass / volume
Unit conversion How many square centimetres in a square metre 1 square metre = 10 000 square centimetres

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-8 min Two contrasting cases A snowshoe and a stiletto with the same body weight Predict which one sinks in
8-22 min Pressure formula P = F / A, one example each way Compute 30 kPa and 1 200 kPa
22-34 min Liquid pressure Depth and density only; shape is irrelevant Compute 3 m and 30 m
34-46 min Upthrust Spring balance difference and Archimedes Compute 20 N of upthrust
46-54 min Floating and hydraulics Density ratio decides; equal pressure in a press Compute the 100 times gain
54-60 min Exit check Mark three items at once, naming the error type Independently

03 Teaching script (read it out)

Scene 1: Pressure is force divided by area, not force itself

Act one covers pressure. Pressure is the perpendicular force divided by the contact area, measured in pascals, where one pascal is one newton per square metre. A 600 newton body on snowshoes with 0.02 square metres of contact gives 600 divided by 0.02, which is 30 000 pascals or 30 kilopascals. The same body on a stiletto with 0.0005 square metres gives 1 200 000 pascals, forty times more, which is why the stiletto sinks in. Students must separate force in newtons from pressure in pascals: in everyday Hong Kong speech the word pressure usually means pressure in the physics sense, so always check the unit. Pressure can be reduced by lowering the force or by spreading the area, which is why rucksacks have wide straps and tanks have tracks. A knife is the opposite case: a thin edge concentrates the same force into a tiny area.
Students repeat: pressure equals force divided by area, in pascals, and one pascal is one newton per square metre.

Students do: the same 600 newtons over 0.0005 square metres, find the pressure and how many times larger it is than the snowshoe value.

Scene 2: Liquid pressure depends only on depth and density

Act two covers liquid pressure. Pressure equals density times gravity times depth, so it depends only on the depth below the surface and the density of the liquid, never on the width or shape of the container. At 3 m of water, 1000 times 10 times 3 gives 30 000 pascals; at 30 m it is 300 000 pascals, and adding atmospheric pressure of 101 325 pascals gives about 401 kilopascals, roughly four atmospheres. Every 10 m of water adds about one atmosphere, so a 10.1 m column balances one atmosphere exactly. Pressure at a given depth acts equally in all directions, which is why dams are thicker at the base and submarine hulls are rounded. The commonest error is to confuse depth with the amount of water: a narrow tube and a wide tank at the same depth have the same pressure at the bottom.
Students repeat: liquid pressure equals density times 10 times depth, and only depth and density matter.

Students do: at 20 m depth, find the water pressure in kilopascals and how many atmospheres that is.

Scene 3: Upthrust equals the weight of fluid displaced

Act three covers upthrust. Archimedes principle: the upthrust on a submerged object equals the weight of the fluid it displaces. Water at 1000 kilograms per cubic metre with 0.002 cubic metres displaced gives 1000 times 10 times 0.002, which is 20 newtons. A 25 newton block hung from a spring balance and lowered into water reads 5 newtons, and the 20 newton drop is the upthrust; the student should describe that experiment themselves. Upthrust does not grow with depth once the object is fully submerged, because the displaced volume stops growing, which is the second classic error. Floating and sinking is decided by density: less dense than the fluid and it floats, and the submerged fraction equals the density ratio. Ice at 917 in water at 1000 floats with 91.7 per cent under the surface, which is why only a tip of an iceberg shows. Iron at 7800 in mercury at 13 600 floats with 57.4 per cent submerged.
Students repeat: upthrust equals the weight of fluid displaced, and once fully submerged it is independent of depth.

Students do: a 25 newton iron block reads 5 newtons in water; find the upthrust and the volume of water displaced.

Scene 4: Hydraulics: the pressure is the same on both sides

Act four covers applications. A sealed liquid transmits pressure, so both pistons feel the same pressure. A small piston of 0.005 square metres pushed with 100 newtons gives 20 000 pascals, and a large piston of 0.5 square metres receives 20 000 times 0.5, which is 10 000 newtons, a hundredfold gain. Car brakes, jacks and excavator arms all work this way. Students must see the trade: the small piston has to travel a hundred times further, because energy is conserved. The one-line summary is that a hydraulic press does not create energy, it trades force for distance.
Students repeat: both sides of a hydraulic press have equal pressure, and the force gain equals the area ratio.

Students do: a small piston of 0.004 square metres is pushed with 80 newtons and the large piston is 0.4 square metres; find the output force.

04 Question types and worked steps

Type Example Steps Answer
Pressure 600 N on 0.02 square metres; find the pressure P = F / A 30 000 Pa or 30 kPa
Liquid pressure Water 3 m deep; find the pressure P = density x 10 x depth 30 000 Pa
Upthrust 0.002 cubic metres of water displaced; find the upthrust density x 10 x volume 20 N
Floating An ice cube in water; how much is submerged submerged fraction equals density ratio 91.7 per cent submerged
Sanity check (teach this): Four checks: (1) with an area below one square metre the pressure number must be larger than the force number, so a smaller answer means a unit slip; (2) liquid pressure adds about 100 kPa per 10 m, so 3 m cannot give 300 kPa; (3) upthrust cannot exceed the weight of the fluid displaced, which for 0.002 cubic metres is exactly 20 N; (4) the output of a hydraulic press must exceed the input, so a smaller output means the area ratio was inverted.

05 Independent practice (3 questions)

Question Answer What to watch
Pressure The same 600 N on 0.0005 square metres; find the pressure 600 divided by 0.0005 1 200 000 Pa or 1.2 MPa
Liquid pressure At 20 m depth; find the water pressure in kPa 1000 x 10 x 20 200 kPa, about two atmospheres
Hydraulics 80 N on 0.004 square metres, output piston 0.4 square metres Find 20 000 Pa, then multiply by area 8 000 N

06 Common mistakes and what to say

Mistake Student writes Say this
Mixing force and pressure Answering that the force is 30 000 pascals Force is in newtons and pascals are pressure. If you write pascals you are giving pressure, not force.
Thinking upthrust grows with depth Saying a fully submerged block feels more upthrust deeper down Once it is fully under, the displaced volume stops changing, so the upthrust is fixed; only the water pressure keeps rising.
Heavy always sinks Saying iron must sink and wood must float It is a density comparison, not a weight comparison. Iron floats on mercury and a steel ship floats on water.
Forgetting gravity in upthrust Computing 1000 times 0.002 to get 2 N Density times volume gives mass; you must multiply by 10 for weight, so your answer is ten times too small.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Pressure Force divided by area, in pascals Calling it a force means act one again
Liquid pressure Depth and density only Answering with the amount of water means a redo
Upthrust Weight of fluid displaced Missing the factor of 10 means two more items

09 Tutor FAQ

Why does only a tip of an iceberg show

Ice has 917 of the density of water, so 91.7 per cent is submerged and only 8.3 per cent stands above the surface.

Is upthrust really independent of depth

Once fully submerged, yes, because the displaced volume no longer changes. While it is still going under, more of it is displacing water each centimetre, so the upthrust rises.

How can a press multiply force

A sealed liquid transmits pressure, and the larger piston has more area, so it receives more force; the small piston pays for it by moving further, since energy is conserved.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →