Paper 2: displacement reactions and metal extraction
- 2026-11-21
Paper 2: displacement reactions and metal extraction
Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.
Paper 2 Ten items on this chapter with answers for immediate marking.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: Metals: reactivity and extraction |
| Level | Advanced |
02 Questions (10 items)
- FoundationWhat mass of hydrogen comes from 12 g of magnesium with excess dilute acid?
- FoundationWhat mass of hydrogen comes from 65 g of zinc with excess dilute acid?
- FoundationIn 2Al + 6HCl -> 2AlCl3 + 3H2, what mass of hydrogen comes from 0.3 mol of aluminium?
- FoundationWhich pair reacts: iron in copper(II) sulphate, or copper in iron(II) sulphate?
- IntermediateWhy is aluminium extracted by electrolysis rather than carbon reduction?
- IntermediateHow do cast iron and steel differ in carbon content and properties?
- ChallengeWhat is the point of coating an iron gate with zinc (galvanising)?
- ChallengeIn the thermite reaction 2Al + Fe2O3 -> Al2O3 + 2Fe, what mass of iron comes from 160 g of iron oxide and 54 g of aluminium?
- Error redoEqual masses of magnesium powder and magnesium ribbon react with dilute acid. Which is faster?
- Error redoWhat happens to the mass of an iron nail left in copper(II) sulphate solution?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | 1 g | 12 / 24 = 0.5 mol of magnesium, a 1 : 1 ratio gives 0.5 mol of hydrogen, so 0.5 x 2 = 1 g. |
| 2 | 2 g | 65 / 65 = 1 mol of zinc gives 1 mol of hydrogen, so 1 x 2 = 2 g. |
| 3 | 0.9 g | The ratio of aluminium to hydrogen is 2 : 3, so 0.3 mol gives 0.45 mol of hydrogen, that is 0.9 g. |
| 4 | Iron in copper(II) sulphate | Iron is more reactive: Fe + CuSO4 -> FeSO4 + Cu, while copper cannot displace iron. |
| 5 | Aluminium is more reactive than carbon, so carbon cannot reduce it | Aluminium stands before carbon in the series, so electrolysis of molten aluminium oxide is required. |
| 6 | Cast iron has more carbon and is hard but brittle; steel has less carbon and is tougher | More carbon means harder but more brittle, and steelmaking lowers the carbon content of cast iron. |
| 7 | Zinc is more reactive than iron, so it corrodes first and protects the iron | Zinc stands before iron in the series and sacrifices itself, which still works when the coating is scratched. |
| 8 | 112 g | 160 / 160 = 1 mol of Fe2O3 needs 2 mol of aluminium, which is exactly 54 g, giving 2 mol of iron = 112 g. |
| 9 | The powder, because its surface area is larger | A larger contact area gives more collisions and a faster rate, though the total hydrogen is the same. |
| 10 | It rises by about 7.5 g, as 1 mol of iron is replaced by 1 mol of copper | Fe + CuSO4 -> FeSO4 + Cu: 56 g of iron leaves but 63.5 g of copper deposits, a net gain of 7.5 g. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Mark your answers at once: locate the metal on the reactivity series, write the equation, then work with moles.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



