/en-tutor-prep-s3-chemistry-metals-reactivity-extraction-practice-3/
/en-tutor-prep-s3-chemistry-metals-reactivity-extraction-practice-3/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Paper 3: limiting reactant and extraction calculations

Paper 3: limiting reactant and extraction calculations

  • 2026-11-21

Paper 3: limiting reactant and extraction calculations

Chapter practice with ten items, answers and a one-line note for each, about 25 minutes.

Paper 3 Ten items on this chapter with answers for immediate marking.

01 Paper details (check answers afterwards)

Item Detail
Questions 10
Suggested time 25
Difficulty mix Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2
Chapter Chapter: Metals: reactivity and extraction
Level Challenge

02 Questions (10 items)

  1. Foundation3 g of magnesium reacts with dilute acid containing 0.20 mol of hydrogen chloride. What is the maximum mass of hydrogen?
  2. FoundationElectrolysis of 204 g of aluminium oxide (2Al2O3 -> 4Al + 3O2) should give what mass of aluminium?
  3. FoundationIf the actual yield is only 90 percent, what mass of aluminium is obtained?
  4. FoundationHow much iron can be smelted from 100 g of ore containing 80 percent iron(III) oxide?
  5. Intermediate20 g of a zinc-iron mixture gives 0.65 g of hydrogen with excess dilute acid. What mass of zinc is present?
  6. IntermediateWhat happens when a copper strip is placed in silver nitrate solution?
  7. ChallengeWhy does a metal powder usually react faster than a lump of the same mass?
  8. ChallengeWhich metal reacts most violently with cold water: sodium, magnesium, iron or copper?
  9. Error redoWhat percentage of the mass of iron(III) oxide is iron?
  10. Error redoIron and copper are both put into dilute acid. Which fizzes, and why?

03 Answers and one-line notes

# Answer One-line note
1 0.2 g 3 / 24 = 0.125 mol of magnesium would need 0.25 mol of acid, but only 0.20 mol is present, so 0.10 mol of hydrogen forms = 0.2 g.
2 108 g 204 / 102 = 2 mol of Al2O3, the ratio 2 : 4 gives 4 mol of aluminium, so 4 x 27 = 108 g.
3 97.2 g 108 x 0.9 = 97.2 g, since yield is actual over theoretical.
4 56 g The ore holds 80 g of pure Fe2O3; 80 / 160 = 0.5 mol gives 1 mol of iron, that is 56 g.
5 13 g Let zinc be x g and iron (20 – x) g: x/65 + (20 – x)/56 = 0.325, giving x = 13 g and iron 7 g.
6 Copper displaces silver: Cu + 2AgNO3 -> Cu(NO3)2 + 2Ag, and the solution turns blue Copper is more reactive than silver, so copper dissolves, silver deposits and the copper ions colour the solution blue.
7 The powder has a larger surface area in contact with acid or oxygen Reaction happens at the surface, so a larger area means more collisions per second and a faster rate.
8 Sodium Sodium reacts vigorously with cold water to give sodium hydroxide and hydrogen, while magnesium needs steam.
9 70 percent Iron is 2 x 56 = 112 g out of 160 g: 112 / 160 x 100 = 70 percent.
10 Only iron, because iron is above hydrogen and copper is below it Iron displaces hydrogen from the acid while copper, sitting below hydrogen, cannot.

04 What to do after marking

  • After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
  • Repeat the same item two days later; move to the next paper only when both attempts are correct.
  • Parents only need the answer and note columns; there is no need to explain every item.

Mark your answers at once: locate the metal on the reactivity series, write the equation, then work with moles.Tutor Registration →

Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →