S3 Geography: Industrial location retry practice (Paper 4)
- 2026-11-19
S3 Geography: Industrial location retry practice (Paper 4)
Ten items targeting common errors: raw-material misconceptions, light-industry pollution, percentage points versus per cent, and definitions of deindustrialisation and reindustrialisation.
Key points Ask which cost dominates; pollution is unrelated to product weight; percentage points differ from per cent; deindustrialisation is a falling share, reindustrialisation is technological upgrading.
01 Paper details (check answers afterwards)
| Item | Detail |
|---|---|
| Questions | 10 |
| Suggested time | 25 |
| Difficulty mix | Foundation 4 · Intermediate 2 · Challenge 2 · Error redo 2 |
| Chapter | Chapter: S3 Geography: Industrial location and manufacturing change |
| Level | Retry practice |
02 Questions (10 items)
- FoundationWhy is it wrong to say factories must sit at the raw material source?
- FoundationIs it true that light industry never pollutes?
- Foundation240 kg of raw material yields 12 kg of product. How many times the product weight is the input?
- FoundationWhy is it wrong to equate deindustrialisation with factory closures?
- IntermediateAssembly wages fall from 45% to 18% of cost. What is the difference in percentage points?
- IntermediateIs land in an industrial estate free?
- ChallengeThree plants draw 120, 180 and 300 kilowatts. What percentage of the total does the largest use?
- ChallengeWhat is missing from the claim that TNCs only pick the cheapest site?
- Error redoWhy is it wrong to call reindustrialisation a reopening of old plants?
- Error redoWhy is it wrong to reduce industrial pollution to air pollution?
03 Answers and one-line notes
| # | Answer | One-line note |
|---|---|---|
| 1 | Only raw-material oriented industries do; market or labour oriented ones locate elsewhere. | Compare which cost item dominates before choosing a site. |
| 2 | No; dyeing and electroplating are light industries yet discharge dyes and heavy metals. | Pollution intensity has nothing to do with product weight. |
| 3 | 20 times (240 ÷ 12). | A ratio this high normally signals a raw-material oriented industry. |
| 4 | Most plants relocated or changed product rather than closing. | Many Hong Kong plants simply moved to the Delta and kept producing. |
| 5 | 27 percentage points (45 − 18); the relative fall is 60%. | The two phrasings give different numbers and cannot be swapped. |
| 6 | No; rents are lower and leases longer, but tenants still pay. | The aim is to cut start-up costs, not to give land away. |
| 7 | 50% (300 ÷ 600 × 100%). | Total the load to 600 kilowatts first, then take the share. |
| 8 | Quality, delivery reliability, supply-chain risk and market access all matter too. | Low cost with unreliable delivery loses orders in the long run. |
| 9 | It uses new technology to make new products, not to restore old production lines. | The point is value and technology, not the number of factories. |
| 10 | Waste water, solid waste, noise and heat pollution also occur. | An environmental impact assessment must cover several pollution streams at once. |
04 What to do after marking
- After marking, redo only the wrong items and write down which step went wrong (formula, unit, or misread number).
- Repeat the same item two days later; move to the next paper only when both attempts are correct.
- Parents only need the answer and note columns; there is no need to explain every item.
Download the full ten-item paper as a PDF, answers and notes included.Tutor Registration →
Questions and answers are written originally by the TutorZone team and are not taken from any school, publisher or examination authority paper. Every value is checked by computer.



