/en-tutor-prep-s3-geography-river-landforms-catchment-management/
/en-tutor-prep-s3-geography-river-landforms-catchment-management/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

Junior Secondary Geography | River Landforms and Catchment Management Prep Guide (for tutors) | 30 m per km gradient, sinuosity 1.5 and a 90-year reservoir

Junior Secondary Geography | River Landforms and Catchment Management Prep Guide (for tutors) | 30 m per km gradient, sinuosity 1.5 and a 90-year reservoir

  • 2026-11-21

The same river cuts a V-shaped valley upstream, swings into meanders in the middle and builds a floodplain downstream. This lesson links landforms, floods and reservoir life with four sets of numbers students can work out.

Objectives — Students can: (1) work out an average gradient of 30 m per km from a 900 m drop over 30 km and name the dominant landform in each course; (2) divide a 12 km channel by an 8 km valley for a sinuosity of 1.5, multiply 25 m by 2 m by 1.8 m per second for a discharge of 90 cubic metres per second, and explain that 30 over a capacity of 60 is 50 per cent; (3) turn 4,500 tonnes of silt a year at 1.5 tonnes per cubic metre into 3,000 cubic metres and a 90-year life for a 270,000 cubic metre reservoir, and show that afforestation cuts runoff from 2.6 to 1.6 million cubic metres, a fall of 38.5 per cent.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Unit conversion A 900 m drop over 30 km, how many metres per km 30 km is 30,000 m, so 900 over 30 gives 30 m per km
Discharge formula 25 m wide, 2 m deep, 1.8 m per second 25 times 2 times 1.8 gives 90 cubic metres per second
Percentage fall 2.6 to 1.6 million, what share of the original 1.0 million over 2.6 million gives 38.5 per cent

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-8 minutes Diagnostic Show a long profile and ask for the dominant landform in each course Name three landforms and say what the evidence is
8-22 minutes Act one: long profile and landforms Work out the gradient from 900 m and 30 km, then match V-shaped valley, meander and floodplain Work out the gradient and draw one landform per course
22-36 minutes Act two: sinuosity and discharge Model 12 over 8 as 1.5, then width by depth by velocity as 90 Work out discharge and compare it with the 60 capacity
36-50 minutes Act three: management and reservoir life Convert silt to volume, divide into capacity, then work out the 38.5 per cent runoff cut Work out reservoir life and list two soft measures
50-56 minutes Independent practice Set three items and circulate, prompt the formula only Finish alone and circle any unit slip
56-60 minutes Exit check Read three questions and note the weakest step Answer orally and write down the weakest step

03 Teaching script (read it out)

Scene 1: Act one: convert the units before naming the landform

The first error is the unit: dividing 900 m by 30 kilometres and writing 900 m per km. Say plainly that 30 km is 30,000 m, so 900 over 30 gives 30 m per km. With the gradient fixed, the three courses explain themselves: a steep upper course erodes downwards and cuts V-shaped valleys, waterfalls and rapids; a gentler middle course erodes sideways and swings into meanders and river bluffs; a nearly flat lower course deposits and builds floodplains, levees and deltas.

Turn dominant process into one repeatable sentence: steep means fast, fast means downcutting; flat means slow, slow means deposition. With that sentence students can explain any course instead of memorising landform names.

The diagnostic sets this up. Give a three-part long profile and ask for the dominant process and one landform in each. Most can name the landforms and cannot name the process, which is exactly the half sentence this lesson supplies.

Steep means fast and downcutting; flat means slow and deposition. V-shaped valley, meander, floodplain

Scene 2: Act two: sinuosity is a ratio, discharge is three things multiplied

Sinuosity is channel length divided by valley length: 12 km over 8 km gives 1.5. Stress that it is a ratio with no units, and that a value greater than 1 means the channel is winding. Students who invert it and write 0.67 reach the opposite conclusion.

Discharge multiplies three measurements: 25 m wide, 2 m deep, 1.8 m per second, giving 90 cubic metres per second. Compare that with a channel capacity of 60 and the excess is 30, or 50 per cent. This is the hinge of the whole flood unit: the same discharge has different consequences depending on capacity, so management can either reduce the flow upstream or raise capacity by dredging and levees.

Ask for one sentence in their notes: flood risk is not rainfall alone, it is the gap between discharge and channel capacity. That sentence is worth more than ten engineering terms.

Sinuosity is channel over valley, 12 over 8 gives 1.5; discharge is 90 against capacity 60, 50 per cent over

Scene 3: Act three: reservoir life and afforestation are both arithmetic

Reservoir life takes two steps. First convert silt to volume: 4,500 tonnes divided by 1.5 tonnes per cubic metre is 3,000 cubic metres a year. Then divide the 270,000 cubic metre capacity by 3,000 to get 90 years. Once students see that 90, catchment protection upstream stops being a slogan and becomes reservoir management.

Afforestation works the same way: a 20 square kilometre catchment with 200 mm of rain holds 4 million cubic metres; a runoff coefficient falling from 0.65 to 0.40 cuts runoff from 2.6 to 1.6 million cubic metres, 1.0 million less, a fall of 38.5 per cent. The denominator is the original 2.6 million, not the reduced figure.

Close by pairing hard and soft options. Hard engineering works at once and costs: 3 km of levee at 40 million per km is 120 million, plus dredging and dams. Soft measures are slower and cheaper: afforestation, floodplain zoning and wetland storage. Add return periods: a 1-in-20-year flood has a 5 per cent chance each year and a 40.1 per cent chance of arriving at least once in ten years, so design standards are never a simple timetable.

4,500 over 1.5 is 3,000 cubic metres a year, 270,000 over 3,000 is 90 years; runoff falls 38.5 per cent

04 Question types and worked steps

Type Example Steps Answer
Gradient 900 m drop over 30 km Convert to the same unit before dividing 30 m per km, steepest in the upper course
Sinuosity Channel 12 km, valley 8 km Channel divided by valley, no units 1.5, a meandering reach
Discharge and flood peak 25 m wide, 2 m deep, 1.8 m per second Multiply the three, then compare with capacity 90 cubic metres per second, 50 per cent over a capacity of 60
Reservoir life 4,500 tonnes a year, density 1.5, capacity 270,000 cubic metres Convert to volume first, then divide 3,000 cubic metres a year, a 90-year life
Sanity check (teach this): Sanity checks: convert kilometres to metres before dividing for the gradient, since 900 over 30,000 gives 30 m per km; sinuosity is channel over valley and only a value greater than 1 means winding; discharge multiplies three measurements in cubic metres per second; the excess proportion is measured against capacity 60, not discharge 90, because 30 over 60 is 50 per cent while 30 over 90 is only 33.3 per cent; silt is converted by dividing tonnes by density, never by multiplying; and the percentage fall in runoff is measured against the original 2.6 million cubic metres.

05 Independent practice (3 questions)

Question Answer What to watch
A 900 m drop over 30 km gives what gradient 30 m per km Check that 30 km is first written as 30,000 m
25 m wide, 2 m deep, 1.8 m per second: discharge and excess over 60 90 cubic metres per second, 50 per cent over Check whether the denominator is 60 or 90
4,500 tonnes a year, density 1.5, capacity 270,000 cubic metres: reservoir life 3,000 cubic metres a year, 90 years Check that volume is found before dividing

06 Common mistakes and what to say

Mistake Student writes Say this
Wrong gradient unit 900 divided by 30 gives 900 m per km 30 km is 30,000 m, so 900 over 30 gives 30 m per km. Convert first, divide second.
Inverted sinuosity 8 over 12 gives 0.67 Channel over valley: 12 over 8 is 1.5, and only a value above 1 means winding.
Excess measured against discharge 30 over 90 gives 33.3 per cent Measure against capacity 60: 30 over 60 is 50 per cent. Capacity is what is being exceeded.
Silt treated as volume 4,500 divided by 270,000 Silt is in tonnes, so divide by density 1.5 to get 3,000 cubic metres before dividing into capacity.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Gradient from a 900 m drop over 30 km 30 m per km If wrong, reteach unit conversion in act one
Discharge and excess for 25 by 2 by 1.8 against capacity 60 90 cubic metres per second, 50 per cent over If wrong, reteach the capacity comparison in act two
Reservoir life for 4,500 tonnes at density 1.5 against 270,000 cubic metres 3,000 cubic metres a year, 90 years If wrong, reteach the volume conversion in act three

09 Tutor FAQ

Which year group is this for

S3 fits best. S4 and above add data-response work and management evaluation, but the gradient, discharge and reservoir-life formulas stay the same.

Must students memorise three formulas

No, they need to order the steps. Gradient is drop over length, discharge is three measurements multiplied, and reservoir life converts silt to volume before dividing, and each step follows from the units.

Is there practice material

Yes. The two homework lines link to Section 07 practice; check units and denominators when the work comes back.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →