/en-tutor-prep-s3-ict-computer-hardware-peripherals-software/
/en-tutor-prep-s3-ict-computer-hardware-peripherals-software/
General Inquiry: info@TutorZone.com.hk
Office Hours: Monday to Saturday - 9:00 AM to 6:00 PM
WhatsApp Monday to Sunday - 24 hours
Hotline: +852 6828 1809
Instant Support: +852 9061 3106

ICT | Computer Hardware and System Software Prep Guide (for tutors) | CPU, Memory, Storage, Peripherals

ICT | Computer Hardware and System Software Prep Guide (for tutors) | CPU, Memory, Storage, Peripherals

  • 2026-11-19

Students can say RAM is memory but cannot say why its contents vanish at power-off, and most multiply by a thousand when converting 16 GB. This lesson splits hardware into three lines: compute and temporary storage, long-term storage, and input and output, each checked with the same units.

Objectives — Students will be able to: (1) explain the roles of CPU, cache, RAM, ROM and storage, and say which data disappears at power-off; (2) convert capacity using 1 GB equals 1,024 MB and explain why the label and the operating system disagree; (3) compute the size of a frame and of one second of display from resolution, colour depth and refresh rate, and name the bottleneck; (4) separate system software from application software and explain what drivers do.

01 Prerequisites (3-minute check)

If any of these fails, fix it before the lesson starts.

Skill Quick check Pass mark
Bits and bytes How many bits are in a byte Eight
Powers of two 1,024 is two to which power Ten
Multiplication and units How many Mb per second is 100 Mbps One hundred Mb

02 Lesson flow (60 minutes)

Time Stage Tutor does Student does
0-6 min Opening diagnostic Ask which memory loses its data at power-off Each answers, class compares
6-18 min CPU, cache and memory Show the instruction cycle and the cache, RAM, storage tiers Rank them from fastest to slowest
18-30 min Storage capacity and units Convert 16 GB and explain the label difference Convert a 512 GB drive
30-42 min Peripherals and bandwidth Compute frame size and per-second data from resolution Compute a 1080p 60 fps stream
42-54 min System and application software Show the roles of OS, driver and application Sort five pieces of software
54-60 min Exit check Collect two questions and mark them, naming the wrong unit or tier Work independently

03 Teaching script (read it out)

Scene 1: Compute and temporary storage: cache, RAM and storage are three tiers

Start by splitting the loose word memory. Cache sits inside the CPU, a few MB at roughly four nanoseconds; RAM sits on the motherboard at about eighty nanoseconds, twenty times slower; an SSD is slower again by tens of times and measured in hundreds of GB. Students who answer memory without a tier cannot explain why adding RAM helps when many programs are open.The instruction cycle takes four words: fetch, decode, execute, write back. A 3.2 GHz clock means 3.2 billion cycles per second, so one cycle is about 0.3125 nanoseconds, which turns fast from an adjective into a number.What survives power-off: RAM needs power, so it clears; ROM and SSD are non-volatile and keep data. Treating more RAM as more storage is the same error, so split it in one line: RAM is the workbench, storage is the cupboard.
Students do: rank cache, RAM, SSD and HDD by speed and give the capacity scale of each.
Students explain: why RAM contents vanish at power-off.

Students repeat: cache is fastest and smallest, RAM next and volatile, storage slowest but persistent.

Scene 2: Capacity is multiplied by 1,024, not by 1,000

The second act is units. Sixteen GB is sixteen times 1,024 cubed bytes, which is 17,179,869,184; students need not memorise the digits but must be able to write sixteen times two to the thirtieth bytes and press the calculator.The label and the operating system disagree because drive makers use decimal units, where one TB is one trillion bytes, while the system uses binary units and divides by 1,024 three times, showing about 931 GB. That is not shrinkage but two definitions living side by side, and an answer must state which one it used.Then speed: a 2.5 GB file over a 100 Mbps link needs 2.5 times 8,000 Mb, which is 20,000 Mb, divided by 100, giving 200 seconds, or three minutes twenty. The common error is skipping the times eight and answering twenty-five seconds.Close the act with a rule: write binary or decimal before calculating, and the marks follow.
Students do: compute the transfer time for 2.5 GB and state the unit.
Students explain: why one drive shows two different capacities.

Students repeat: binary multiplies by 1,024, decimal by 1,000, and speed problems multiply bytes by eight.

Scene 3: Peripherals and software tiers: find the bottleneck, do not guess

The third act covers output and software. A 1920 by 1080 screen at three bytes per pixel holds 6,220,800 bytes, about 5.93 MiB per frame, and sixty frames a second is 373,248,000 bytes per second, roughly 356 MiB per second. That number explains why games want a discrete graphics card: the data volume is computed, not described as big.A 60 Hz refresh means 16.67 milliseconds per frame, and anything slower drops frames, so bottleneck analysis compares three numbers: CPU time per frame, graphics bandwidth and network bandwidth, where the slowest line sets the experience.Software comes in two layers: system software covers the operating system and drivers, managing hardware and offering an interface; application software is the browser, word processor or game students open. A driver is the middle translator, and a wrong version breaks the device, which is why a new printer needs its driver installed first.Close with a check: any hardware answer must name the tier, the quantity and the unit; missing all three is description, not an answer.
Students do: compute the raw per-second data of 1080p at 60 fps and name the likely bottleneck at home.
Students explain: which layer drivers belong to and why a bad install breaks hardware.

Students repeat: hardware is compute, temporary storage, storage and peripherals; software is system and application, with drivers in between.

04 Question types and worked steps

Type Example Steps Answer
Capacity conversion 16 GB in bytes Multiply by 1,024 three times 17,179,869,184 bytes
Transfer time 2.5 GB over 100 Mbps Multiply by eight for Mb, then divide by bandwidth 200 seconds, three minutes twenty
Display data 1920 by 1080 at three bytes, 60 fps Multiply resolution, depth and frame rate 5.93 MiB per frame; about 356 MiB per second
Software sorting Windows, printer driver, Excel, browser Two columns: system and application System: Windows, driver; application: Excel, browser
Sanity check (teach this): Sanity checks: capacity uses bytes or multiples, so state binary or decimal; RAM is measured in GB and storage in GB or TB, and identical numbers usually mean the tier is wrong; a transfer time is positive and plausible, since 2.5 GB over 100 Mbps cannot take less than 200 seconds; a frame size equals resolution times colour depth, and anything smaller than the screen means a missing factor; per-second data divided by frame rate must return the frame size, or one multiplication is wrong; cache is smaller than RAM and RAM smaller than storage, so a reversed ranking is a conceptual error.

05 Independent practice (3 questions)

Question Answer What to watch
Capacity How does a 512 GB drive appear to the system Check the division by 1,024 three times About 476.8 GB
Transfer 1.5 GB over 50 Mbps Check the times eight 240 seconds, four minutes
Display 1280 by 720 at three bytes, 30 fps Three steps in order 2.64 MiB per frame, about 79 MiB per second

06 Common mistakes and what to say

Mistake Student writes Say this
Treating RAM as storage Writes 16 GB of RAM stores 16 GB of photos RAM is the workbench and clears at power-off; photos live on the SSD, counted separately.
Multiplying by 1,000 Writes 16 GB equals 16,000,000,000 bytes The system uses binary units: 1,024 cubed gives 17,179,869,184.
Skipping the times eight Writes 2.5 GB at 100 Mbps takes 25 seconds Convert GB to Mb by multiplying by eight: 20,000 over 100 is 200 seconds.
Calling a driver an application Writes a driver is application software Drivers are system software that translate hardware instructions; without them the device fails.

07 Homework (paper, section and question numbers)

08 Exit check (last 5 minutes)

Question Answer Decision
Tiers Cache, RAM, storage in order with properties Wrong order means repeating act one
Units Binary times 1,024, bytes times eight Wrong factors mean two more conversions
Software Drivers are system software Wrong column means repeating act three

09 Tutor FAQ

What if powers of two are new

Show the calculator pressing 1,024 three times, then add that 1,024 is two to the tenth, without expanding exponents.

Should students memorise model specs

No. Exams test concepts and conversions while models change yearly; tiers and units are enough.

Can hardware be taught without equipment

Yes. A labelled motherboard photo is enough to point out slots; with hardware, let students locate RAM and the SSD themselves.

Find a tutor — freeTutor Registration →

A TutorZone lesson-prep guide. Written by the TutorZone team; questions and lesson flow are original and are not taken from any school or publisher material.

Join as a tutor or coach — academic, music, sports, arts, STEM. Free to register. See how it works →